Handleiding
Je bekijkt pagina 9 van 56
9
Keypad Feature Instructions
NOTE: This microwave comes with the added feature of a 2-step
door opening functionality to avoid unintended access. When
children do not have access to the appliance, there is a disable
function if the 2-step functionality is not needed.
Disable/Enable 2-step door function operation on the display:
Steps to disable the 2-step door function operation:
1. After pressing the STOP/UNLOCK button for 3 seconds, “DI:_0”
will show on the display.
2. After pressing the “0” button, “DI:_1” will show on the display.
3. Press the START button to conr
NOTE: DI (Disable)
NOTE: If you unplug the microwave, it will remember the last
operation. You will not need to disable or enable the 2 step door
function again.
Steps to enable the 2-step door function operation:
1. After pressing the STOP/UNLOCK button for 3 seconds, “EA:_0”
will show on the display.
2. After pressing the “0” button, “EA:_1” will show on the display.
3. Press the START button to conrm.
NOTE: EA (Enable)
IMPORTANT: Disabling this feature should only be done when the
owner is certain and children are not present.
0-9 Keypad Number User can press 0-9 keypad number to select cook time, food class,
food weight.
In standby mode, press the keypad button 1 or 2 or 3, the
microwave oven
at 100% power for 1 min, 2 min, 3 min of cook time directly. No need
press START button to conrm.
Cook Time/Power Set Manual cooking time and power To set cooking time length and change power level:
1. Press the Cook Time/Power button.
2. Press the number buttons to set the length of cook time, for
example 2:30, press number “2 3 0”.
3. Press the Cook Time/Power button again to change the power
level.
4. Press number buttons to set the power levels, for example press
“8 0” to set the power level to 80%.
5. Press START button to start.
You can skip step 3 and 4 if you want to cook at 100% power level.
Keep Warm Keep Warm The function allows to keep your dishes warm. To use:
1. Press “Keep Warm” button, default time “30:00” will show on the
display.
2. Press “Keep Warm” or keypad 0-9 button to select 15 min,
30 min, 45 min or 60 min.
3. Press Start button.
NOTE: The Keep Warm cycle last for a duration of 15 minutes
(default 30 minutes), the maximum time is 60 min. Each 15min cycle,
microwave will be turned on 1.5 min, then cavity lamp and fan are
off, only the countdown time is shown.
Steam Clean Auto cleaning cycle The cleaning cycle will help to clean the microwave oven cavity
1. Place 1 cup of water (~250mL) in the middle of the cavity.
2. Press “Steam Clean” button, default “12:00” time will show on
display
3. Press the START button to start the function
(After nishing the water heat-up cycle (9min), the cavity lamp and
fan will be off , the countdown time is shown.)
NOTE: Please follow Tips and Suggestions in Steam Clean section
Bekijk gratis de handleiding van Whirlpool WMCS3018RW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WMCS3018RW |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 6153 MB |
