Whirlpool WMCS3018RW handleiding

56 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 8 van 56
8
Keypad Feature Instructions
Timer
(Hold to Set Clock)
Hold to Set the Clock To set the clock, follow the instructions below:
1. Press TIMER for 3 seconds to enter clock setting.
2. Press the keypad 0-9 button to set the hour, press START button
to conrm.
3. Press the keypad 0-9 button to set the minute.
4. Press START button.
NOTE: The microwave oven must be in standby. It will also appear
every time the product is plugged in. The screen shows“12 Hr” ( “12”
ashing), press timer button or keypad to toggle between 12 or 24
hour format, press START to conrm; then the screen shows “12:00”.
Timer
(Hold to Set Clock)
Set cooking Timer The cooking timer functions like a stop watch. To set the cooking
timer, following the instructions below:
1. Press Timer button.
2. Press the keypad 0-9 button to enter desired time.
3. Press START button.
NOTE: While the Timer countdown is active in the display, touch
STOP/Unlock to stop the Timer. The timer does not start or stop the
microwave oven.
START
+ 30Sec
Add 30Seconds The button Start can be used in two ways:
1. To start the microwave by cooking for 30seconds with FULL
power in standby mode.
2. To increase a cooking time using increments of 30seconds.
Each press adds 30seconds.
START
+ 30Sec
Start Function Press the START button to start any cooking function. If cooking is
interrupted by opening the door, touch the START button after the
door is closed again to resume the cycle
STOP/UNLOCK Microwave Pause/Stop Function The STOP/UNLOCK button stops any microwave oven function
except for the clock.
The microwave oven will also turn off when the door is opened.
When the door is opened, the element(s) will turn off, but the
microwave oven light will remain on. Close the door and touch the
START button to resume the preset cycle.
STOP/UNLOCK 2-Step Door Opening This microwave comes with the added feature of a 2-step door
opening functionality to avoid unintended access.
The STOP/UNLOCK button can be used to pause/cancel the
function during or after cook time.
The STOP/UNLOCK button can be used for 2-step door opening:
1. Once you set the cooking time and press the START button, the
Door Lock icon will appear on the display.
2. To open the microwave:
n Press STOP/UNLOCK.
n Press door release button.
NOTE: Once you press the STOP/UNLOCK button to stop/pause
any function, the Door Lock icon will disappear for 10 seconds and
you will be able to press the push button to open the door.
The Door Lock icon will reappear after 10 seconds and require you
to repeat steps 1 and 2 to open the door.
NOTE: When the machine is powered on after plug-in, the 2-Step
Door function will not be triggered.
If a cooking cycle starts after the door closes, then 2 steps are
required to open the door. Once the 2 steps have been used to open
the door, if the door closes and no cooking power is applied, then
you can open the door by just press the door release button.
Keypad Instructions

Bekijk gratis de handleiding van Whirlpool WMCS3018RW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkWhirlpool
ModelWMCS3018RW
CategorieMagnetron
TaalNederlands
Grootte6153 MB