Whirlpool WLX6001DNFF handleiding

Niet gecategoriseerd

Whirlpool

24 pagina's

PDF beschikbaar

Handleiding

DAILY USE

SWITCHING THE HOB ON/OFF

To turn on the hob, press and hold the power button. The LED above the button

will turn on, and you will hear an acoustic signal. After a few seconds, you can

interact with the hob. To turn the hob o, press the same button again; all the

cooking zones will be deactivated.

POSITIONING

Do not cover the control panel symbols with the cooking pot.

Note: In the cooking zones close to the control panel, it is advisable to keep

pots and pans inside the markings (taking into consideration both the bottom

of the pan and its upper edge, as this tends to be larger).

This prevents excessive overheating of the keypad. When grilling or frying, use

the rear cooking zones if possible.

ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING

POWER LEVELS

OFF

To activate the cooking zones:

When the hob is turned ON, the scroll keypad (SLIDER) of all available cooking

zones will turn ON in low luminosity. Place your nger on the scroll keypad

(SLIDER) of the zone you want to activate, and gently slide it to the right if you

want to increase the power level or to the left to decrease it. You will notice that

the control keypad segments will shift to high luminosity based on the selected

power level, and the display digits will show the number corresponding to the

power level selected (from 1 to 18).

The ”P” button can be used to select the fast heating function (Booster) to quickly

boil water.

To deactivate the cooking zones:

Select the “OFF“ button at the beginning of the scroll keypad.

NOTE: Water spillage, food overow and/or an object positioned on the

control panel buttons can mimic your nger and accidentally activate or

deactivate any of the hob buttons. If such elements are not removed within 8

seconds, the hob makes two short acoustic sounds and switches OFF by itself

while showing the "OFF" message.

CONTROL PANEL LOCK

The control panel lock function is designed to lock the hob settings, to prevent

accidental changes to the settings or the unintentional activation/deactivation

of the functions. You may need to use this function for example in case of

possible liquid or food spillage, or for safety reasons (children's accidental

interaction with the hob) to prevent any risk of the hob turning on by accident.

To use the control panel lock function press and hold the

button for 3 seconds.

The button switches to high luminosity and a beep and a light above the symbol

indicate that this function has been activated. To unlock the controls, repeat the

activation procedure.

NOTE: The control panel is locked except for the switching o function. If you

turn your hob o with the control panel lock active, press the ON/OFF button

and then press the lock button for 3 sec to unlock the hob.

WIPE FUNCTION

The wipe function temporarily locks the buttons of the user interface to prevent

accidental changes to the settings during the cleaning process. The function

doesn’t interrupt the cooking process.

Wipe function helps to prevent any sounds if water spills on the user interface

during the cooking process or during your habitual cleaning.

For safety reasons, the ON/OFF button can be activated, even involuntarily,

during cleaning.

To activate the Wipe function:

1. Press Wipe function button (



. You will hear an acoustic sound when

the function is active.

2. The LED above the button will turn on and stay on while the button itself

ashes for the entire duration of the function activity.

3. The control panel remains locked for 30 seconds.

TIMER

The timer controls all the active cooking zones.

To activate the timer:

1. Select the cooking zone and set the required power level.

2. The timer button will turn on approximately 5 seconds after the cookware

has been recognised. Press it until an indicator light turns on in line with

the specic symbol on the chosen cooking zone.

3. Use the up (

) and down ( ) arrows to set the time (don't press and

hold them for more than 8 seconds, otherwise the hob shows OFF. For more

information, refer to the "Troubleshooting" section). The time will change

from 000 seconds to 30 minutes, increasing by 1 minute each time; from 30

to 150 minutes, the time will increase in steps of 5 minutes. If you need to

change the time by 10 minutes, use the side dashes. The dash on the left

will subtract 10 minutes, while the dash on the right will add 10 minutes (see

following image).

4. To conrm the time set, you can press the clock button (



. Otherwise, the

time will be automatically conrmed after 5 seconds without any action.

5. You can change the time at any point and activate multiple timers

simultaneously.

6. During the countdown, tap with your nger on the slider to see the power

level. Tap the up (

) or down ( ) arrow to see the set temperature.

After 3 seconds, the countdown will reappear.

7. Once the timer has elapsed, a beep will sound, and the cooking zone will

switch o automatically.

To deactivate the timer:

Press the down arrow (

) until it shows 000, and it will be deactivated after 5

seconds.

TIMER INDICATOR

This LED (when ON) indicates that the timer has been set for the cooking zone.

MAXIMUM WORKING TIME OF COOKING ZONES AND FUNCTIONS

Power level or function OFF 1-3 4-6 7-9 10-12 13-15 16-18 Booster * Booster ** Melting Keep warm

Maximum working time - 8 h 6 h 4 h 3 h 2 h 1.5 h 10 min. 5 min. 8 h 8 h

Power level after time-out - 0 0 0 0 0 0 18 18 0 0

* Cooking Zone 1, 2, 3

** Cooking Zone 4

Examples regarding the values in the table above:

If you turn on a cooking zone and set its power to level 14, the cooking zone will continue working for a maximum of 2 hours. After 2 hours, the power level will drop to level

0 and the cooking zone will turn off automatically. If there are no other active cooking zones and there is no interaction with the control panel buttons within 30 seconds,

the hob will turn off automatically.

If you activate the Booster function on cooking zone 4, it will automatically drop to power level 18 after 5 minutes. On the other hand, if you activate the Booster function

on cooking zone 1, 2 or 3, it will automatically drop to power level 18 after 10 minutes. After 1.5 hours, the power level will drop to level 0 and the cooking zone will turn off

automatically. If there are no other active cooking zones, and there is no interaction with the control panel buttons within 30 seconds, the hob will turn off automatically.

Owner's manual

Bekijk gratis de handleiding van Whirlpool WLX6001DNFF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.