Handleiding
Je bekijkt pagina 9 van 60
Step 6: Securing the Side Brackets
Extend the side brackets from both sides of the air conditioner
onto the left and right window frames and secure by installing
four 3/4" screws as shown.
Step 4: Applying the Adhesive Foam Seal
Measure the length of the upper window frame, trim the
adhesive foam seal to the appropriate length, and apply
as shown below.
Step 5: Placing Inside an Open Window
Using team lift, gently lift the air conditioner and place
in the windowsill.
Next, close the window, making sure the
against the windowsill.
NOTE: The air conditioner should be tilted about 3° to allow
for better drainage of condensation and rainwater.Using a
level, measure measure about 1/3 bubble for the correct
slant.
Adhesive
Foam Seal
Outside Inside
Bottom
Rail
About 3°
Step 7: Securing the Side Panels
Step 8: Sealing Any Gaps with Modeling Clay
(Plasticene)
Pull the side panels inwards to align with the brackets, then secure
onto the sides by snapping the jutting points onto the locking pins.
The side panels should be locked by 1/4" Long Hex-head Screw.
Fill the crevices between the side brackets and panels with the
included plasticene.
Secure the 1/2" Screw into the top rail of the air conditioner to
the window frame.
Step 9: Securing the Screw into the Top Rail
9
When open the window, be sure that all the screws are
fastened tightly.
Bekijk gratis de handleiding van Whirlpool WHAW-151IN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WHAW-151IN |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 7242 MB |
