Whirlpool WDT550SAPZ handleiding
Handleiding
Je bekijkt pagina 22 van 64
22
23. Check for plumb and adjust legs if needed
A
B
C
A. 5/16" (8 mm) nut drivers or hexsockets
B. Pliers - Adjustable upto 2" (5.0 cm)
C. Small level
Use an adjustable wrench to adjust the front feet and a 5/16"
(8 mm) socket to adjust the rear foot. Raise the dishwasher
to 1/8" (3 mm) of the counter top. Check that the dishwasher
is centered from left to right in the opening. If needed, adjust
the leveling legs until the dishwasher is plumb.
Helpful Tip: If the front leveling feet are hard to adjust,
protect the customer’s floor and use an adjustable wrench.
Or alternately, use of 2 or more air shims to temporarily lift
the front of the dishwasher.
Secure Dishwasher in Cabinet
Opening
24. Double-check dishwasher alignment in
cabinet opening
Check that dishwasher is still level front to back and side to
side in the cabinet opening.
Open dishwasher door and place towel over pump assembly
and spray arm of dishwasher. For some models, you may
have to remove lower dish rack. This will keep screws from
falling into pump area when you are securing dishwasher to
countertop or cabinet.
25. Side Gap Covers
1. Remove the Side Gap Covers from the 2
nd
level rack of
the dishwasher.
2. Remove the four screw from dishwasher.
Bekijk gratis de handleiding van Whirlpool WDT550SAPZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WDT550SAPZ |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 11080 MB |
