Handleiding
Je bekijkt pagina 14 van 204
was powered). During this waiting time, the display will
show the following feedback “WATER IS HOT”.
» PHASE 1/2: DESCALING (70 MIN)
When display will show <ADD 0.25 L OF SOLUTION>,
please pour the descaling solution in the drawer. For
best results in descaling, we recommend filling the
tank with a solution composed of 75 g of the specific
WPRO product and 250 ml of drinking water. WPRO
descaler is the suggested professional product for the
maintenance of the best performance of your steam
function in the oven. For orders and information
contact the after sales service.
Beko Europe will not be held responsible for any
damage caused by the use of other cleaning products
available on the market.
1+
= 75 g
+2
250 ml
3
Once the descaling
solution is poured
inside the drawer,
press
to start
the main descaling
process. The
descaling phases
do not need you to
stay in front of the
appliance. After
each phase is
completed, an acoustical feedback will be played and
the display will show instructions to proceed with the
next phase.
Once the descaling phase has been completed, the
boiler will be drained: the descaling solution used
during this phase will be poured into the extractable
drawer.
» PHASE 2/2: RINSING (30 MIN.)
To remove descale residuals from the drawer and
the steam circuit, rinse cycle has to be done. When
display shows <ADD 0.25 L OF WATER> fill the tank
with 0,25 L of drinking water, then press
to start
the rinsing. Do not turn off the oven until all the steps
required by the function have been completed.
Please note: if needed from the system, it could be
requested to emty the drawer and to repeat this
operation.
When Descale procedure is completed, it is suggested
to dry the cavity from potential water residuals. It will
be then possible to use all the steam functions.
Please note: during the Descale cycle, some noise could
potentially be heard since the oven pumps are activated
in order to guarantee the optimal descale efficiency.
Once the maintenance cycle has started, do not remove
the drawer unless requested by the appliance.
Please note: After the boiler gets filled by the descaling
solution and the display shows “DESCALING PHASE 1/2”,
the cycle should not be interrupted, otherwise the entire
descaling cycle must be repeated before being able to run
any steam function.
Bekijk gratis de handleiding van Whirlpool WCS9A9PHTSBA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WCS9A9PHTSBA |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 33829 MB |
