Handleiding
Je bekijkt pagina 13 van 204
to the favorite to customize it to your preferences.
• Select the function you want to change.
• Tap the three dots icon
on the top right corner.
• Select the attribute you want to change.
• Tap “SAVE” to confirm your changes.
If you want to remove a specific function you will find
in this Menu the “DELETE FAVORITE”
option.
10. TOOLS
Press to open the “Tools” menu at any time. This
menu enables you to choose from several options
and also change the settings or preferences for your
product or the display.
MUTE
To quickly turn your device’s sounds on or off.
Other specic sound volume settings can be managed in the
Preferences menu, under Sound & Volume.
STEAM CLEAN
The action of water vapor released during this special
cycle of cleaning by means of a low temperature,
facilitates removal of grime. Activate the function
when the oven is cold.
Press
to activate the function: the display will
prompt you to carry out all actions needed to obtain
the best cleaning results.
Please note: It is recommended to do not open the oven
door during the cleaning cycle to avoid a loss of water vapor
that could get an adverse eect on the nal cleaning result.
An appropriate message will start flashing on the
display once the cycle has finished. Leave the oven to
cool down and then wipe and dry the interior surfaces
with a cloth or a sponge.
PREFERENCES
For changing several oven settings, selecting Sabbath
Mode and switching o “Demo Mode”.
INFO
For obtaining further information about the product.
11. FOOD PROBE
Using the probe enables you to measure the core
temperature of different food types during cooking
to ensure that it reaches the optimum temperature.
The temperature of the oven varies according to
the function that you have selected, but cooking
is always programmed to finish once the specified
temperature has been reached. Place food in the
oven and connect the food probe to the socket.
Keep the probe as far away from the heat source
as possible. Close the oven door. You can choose
between the manual (by cooking method) and AUTO
MODES (by food type) functions if use of the probe is
allowed or required.
Once a cooking function has been started, it will be cancelled
if the probe is removed.
Always unplug and remove the probe from the oven when
taking out the food.
USING THE FOOD PROBE
Place the food in the oven and connect the plug
by inserting it into the connection provided on the
righthand side of the oven’s cooking compartment.
Make sure that the cable does not touch the top
heating element during cooking.
MEAT: Insert the probe deep into the meat, avoiding
bones or fatty areas. For poultry, insert the probe
lengthways into the centre of the breast, avoiding
hollow areas.
FISH (whole): Position the tip in the thickest part,
avoiding the thorns.
If you use the probe when cooking with the
AUTO MODES functions, cooking will be stopped
automatically when the selected recipe reaches the
ideal core temperature, without the need to set the
oven temperature.
12. DESCALE
This special function, activated at regular intervals,
allows you to keep the steam system in the best
condition. Once the function is started, follow all the
steps indicated on the display. The duration of the full
function may take up to 120 minutes and cannot be
stopped. Descale can be started anytime by the user
from the Cleaning Menu.
The display will show you when it is time to run a
Descale cycle (see the table below).
DESCALE MESSAGE MEANING
<DESCALE RECOMMENDED>
It appears after around 15
hours of steam cycles*
It is recommended to run a
Descale cycle.
<DESCALE NEEDED>
It appears after around 20
hours of steam cycles*
Descale is mandatory. It is not
possible to run a Steam cycle
until a Descale cycle will be
carried out.
*considering the default value (4 - Hard) of water
hardness level. The number of hours of steam cycles
that must pass before the Descale messages are shown
depends on the water hardness level set on the
appliance.
The descaling procedure can also be performed
whenever the user desires a deeper cleaning of the
internal steam circuit.
Before to run the descaling phase, the appliance will
check if some residual water is contained into the
boiler, and a Drain cycle could be performed, if
needed. In this case, you will have to empty the
drawer after the Drain cycle, before continuing with
the Descale Phase.
Please note: to ensure that the water is cold, it is not
possible to perform this activity before 30 minutes have
elapsed from the last cycle (or the last time the product
Bekijk gratis de handleiding van Whirlpool WCS9A9PHTSBA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WCS9A9PHTSBA |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 33829 MB |
