Westinghouse WST20V handleiding
Handleiding
Je bekijkt pagina 6 van 44
6
|
English
SAFETY
Battery tool use and care
• Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
• When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other
small metal objects, that can make a connection from one
terminal to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the bat-
tery; avoid contact. If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behaviour resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or tool to fire or excessive tem-
perature. Exposure to fire or temperature above 130 °C may
cause explosion.
• Follow all charging instructions and do not charge the battery
pack or tool outside the temperature range specified in the
instructions. Charging improperly or at temperatures outside
the specified range may damage the battery and increase the
risk of fire.
Service
• Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs
should only be performed by the manufacturer or authorized
service providers.
Lawn trimmer and lawn edge trimmer safety warnings
• Do not use the machine in bad weather conditions, especially
when there is a risk of lightning.This decreases the risk of
being struck by lightning.
• Thoroughly inspect the area for wildlife where the machine
is to be used. Wildlife may be injuredby the machine during
operation.
• Thoroughly inspect the area where the machine is to be used
and remove all stones, sticks, wires, bones, and other foreign
objects. Thrown objects can cause personal injury.
• Before using the machine, always visually inspect to see that
the cutter and the cutter assembly are not damaged. Damaged
parts increase the risk of injury.
• Keep guards in place. Guards must be in working order and be
properly mounted. A guard that is loose, damaged, or is not
functioning correctly may result in personal injury.
• Keep all cooling air inlets clear of debris. Blocked air inlets and
debris may result in overheating or risk of fire.
• Wear eye protection and ear protection. Adequate protective
equipment will reduce personal injury.
• While operating the machine, always wear non-slip and pro-
tective footwear. Do not operate the machine when barefoot
or wearing open sandals. This reduces the chance of injury to
the feet from contact with the moving cutter.
• Always wear clothing such as trousers that covers the op-
erator’s legs while operating the machine. Contact with the
moving cutter or line may cause injury.
• Keep bystanders away while operating the machine. Thrown
debris can result in serious personal injury.
• Do not operate the machine above waist height. This helps
prevent unintended cutter contact and enables better control
of the machine in unexpected situations.
• Exercise caution when operating the machine in wet grass.
Walk, never run. This reduces the risk of slipping and falling
which may result in personal injury.
• Do not operate the machine on excessively steep slopes. This
reduces the risk of loss of control, slipping and falling which
may result in personal injury.
• When working on slopes, always be sure of your footing,
always work across the face of slopes, never up or down
and exercise extreme caution when changing direction. This
reduces the risk of loss of control, slipping and falling which
may result in personal injury.
• Keep all power cords and cables away from cutting area. Power
cords or cables may be hidden in hedges or bushes and can
be accidentally cut or damaged by the line or cutter.
• Keep all parts of the body away from the moving trimmer
cutter or line. Do not clear material from the machine until it
has been disconnected from the power source. The moving
trimmer cutter or line may result in serious personal injury.
• Carry the machine with the machine switched off and away
from your body. Proper handling of the machine will reduce
the likelihood of accidental contact with a moving trimmer
cutter or line.
• Only use replacement cutting heads and trimmer cutters or
lines specified by the manufacturer. Do not replace the trimmer
cutters or lines with metal wires or blades. Incorrect replace-
ment parts may cause loss of control, breakage and injury.
Bekijk gratis de handleiding van Westinghouse WST20V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | WST20V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3902 MB |
