Westinghouse WST20V handleiding
Handleiding
Je bekijkt pagina 13 van 44
English
|
13
PROBLEM POSSIBLE CAUSE CORRECTION
Trimmer runs slowly
Check that the spool housing can rotate freely Carefully clean it if necessary
Check that the cutting line does not protrude more
than approximately 5-3/8 inches (136mm) from
the spool.
If it does, cut it off so that it just reaches the line
trimming blade.
Trimmer will not start
Battery pack not installed properly Check battery pack installation
Battery pack not charged Check battery pack charging requirements
Battery pack will not
charge
Surrounding air temperature too hot or too cold
Move charger and tool to a surrounding air temperature
of above 40 degree F (4.5°C) or below 105 degree F
(+40.5°C).
Charger not plugged in
Plug charger into a working outlet.
Check current at receptacle by plugging in a lamp or
other appliance.
Check to see if receptacle is connected to a light
switch which turns power off when you turn out the
lights.
Battery pack not inserted into charger Insert battery pack into charger until red LED appears
TROUBLESHOOTING
Bekijk gratis de handleiding van Westinghouse WST20V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | WST20V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3902 MB |
