Westinghouse WLB20V handleiding
Handleiding
Je bekijkt pagina 11 van 41
11
OPERATION
ASSEMBLY
• Do not place the charger in an area of extreme heat or cold.
• The battery pack will become slightly warm while charging. This is normal and does not indicate
a problem.
• The green LED light will remain on after charging is complete.
• Pull the battery pack up to remove the battery pack from the charger.
Note: Occasionally, the permissible temperature range may be exceeded during the charging
cycle. In this case, the electronic charging control interrupts the charging cycle to avoid any
damage to the battery. The red control light will then glow continuously. If you should witness this,
pull the battery from the charging station and let it cool down for about 30 minutes. Then, restart
the charging cycle by sliding the battery back onto the charging station.
For complete charging instructions, refer to the user manuals for your Westinghouse battery pack
and charger models.
BEFORE OPERATING
CAUTION: Always wear safety glasses. Wear a lter mask if the operation is dusty. Use of
gloves, long pants and substantial footwear is recommended. Keep long hair and loose clothing
away from openings and moving parts. THIS BLOWER IS FOR HOUSEHOLD USE ONLY.
• Check that all parts are connected properly before operating the device.
• Examine the work area before starting work. Use a rake or broom to remove all objects or
wastes which could be hurled away by the leaf blower.
• If needed, lightly moisten dusty ground.
BLOWING FUNCTION
1. Switch on the device by holding the switch button
upwards.
2. Hold the blower with one hand as shown and sweep
from side to side with the nozzle several inches above
the ground. Advance slowly to keep debris ahead of the
blower.
3. Blow waste material into a heap.
• Do not direct the air jet into the middle of the waste
heap.
• Adjust the blowing power to the requirements.
• Be sure the air jet is not directed at children, animals,
open windows or automobiles.
• Keep the ventilation slots free during operation to
prevent overheating.
• Do not use the device on wet ground.
4. Clean the device after use.
A
A - On/o switch
Bekijk gratis de handleiding van Westinghouse WLB20V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | WLB20V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4587 MB |
