Westinghouse WH25U handleiding
Handleiding
Je bekijkt pagina 4 van 8
4
INSTALLATION
CAUTION: Always use the handle to lift the pump. Never use the power cord to lift the pump. To avoid skin burns,
unplug the pump and allow time for it to cool after periods of extended use.
1. Connecting a 3/4 in. garden hose
Attach a 1 in. female adaptor (B) to the pump discharge.
Attach a garden hose with a 3/4 in. garden hose thread (not included) to the adaptor.
NOTE: NOTE: Be sure the 3/4 in. garden hose thread connector has a rubber gasket to
minimize water leaks.
NOTE: The larger the inside diameter and the shorter the length of hose, the less pressure
that is lost (or the larger the flow rate).
2. Connecting a 1-1/4 in. hose kit
If you would prefer to use a 1-1/4 in. hose kit (not included) in order to pump water
away more quickly.
Attach the adaptor (B) to the pump (A) discharge
Securely attach the hose kit (not included) to the adaptor (B).
WARNING: Secure the discharge hose before plugging in the pump. An unsecured
discharge hose may “whip” possibly causing personal injury, and/or property damage.
OPERATION
1. Plugging in the pump
Place the pump on a solid base in flooded area or any place that you
would like to remove water. Plug the pump into a 115 Volt GFCI power
outlet.
WARNING: Do not handle the pump or pump motor with wet hands or when
standing on a wet or damp surface, or in water.
NOTE: Place upright on a solid base.
NOTE: The pump must be standing in at least 1 in. (25.4 mm) of water before
you start it. The shaft seal is water lubricated and may be damaged if the
pump runs dry.
Bekijk gratis de handleiding van Westinghouse WH25U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | WH25U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 815 MB |
