Weller WLHG1212A handleiding
Handleiding
Je bekijkt pagina 7 van 32
7
EN
ENGLISH
SPECIFIED CONDITIONS OF USE
The device is suitable for soldering copper pipes, tinning
body parts, welding and fusing plastics, thawing water pipes,
and heating metal parts.
The manufacturer shall not be liable for damage resulting
from misuse of the product or unauthorized alterations.
BEHAVIOR IN EMERGENCY
Initiate appropriate rst aid measures according to the
injury and request qualied medical assistance as soon as
possible. Protect the injured person from further harm and
keep them calm. When requesting help, provide the following
details:
1. Location of the accident,
2. Type of accident,
3. Number of injured,
4. Nature of injuries
MAINS CONNECTION
Operation is only permitted
with a residual current device
(RCD max. 30mA).
The rated voltage specied on the device must match the
mains voltage. EN 61000-3-11;
Zmax = 0.215 Ω + j 0.134 Ω.
Connect only to single-phase AC system voltage as indicated
on the rating plate. It is also possible to connect to sockets
without an earthing contact as the design conforms to safety
class II. Only plug-in when machine is switched off.
Health hazard!
To reduce the risk of injury, user must read and understand
this operator‘s manual before operating this tool. Save this
Manual for future reference.
The Operation of any power tool can result in foreign objects
being thrown into your eyes, which can result in severe eye
damage. Before beginning tool operation always wear safety
goggles or safety glasses with side shields and a full face
shield when needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses
with side shields. Always wear eye protection which is
marked to comply with ANSI Z87.1.
GENERAL SAFETY RULES
The Operation of any power tool can result in foreign objects
being thrown into your eyes, which can result in severe eye
damage. Before beginning tool operation always wear safety
goggles or safety glasses with side shields and a full face
shield when needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses
with side shields. Always wear eye protection which is
marked to comply with ANSI Z87.1.
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals
are:
• Lead from lead-based paints, or solder that contains lead.
• Crystalline silica from bricks and cement and other masonry
products, and
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks
that are specially designed to lter out microscopic particles.
Read these instructions and the accompanying safety
information carefully before starting up the device and
starting work with the device. Failure to follow all inst-
ructions listed below may result in electric shock, re
and/or serious personal injury.
WORK AREA SAFETY
• Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug
in anyway. Do not use any adapter plugs in any earthed
(grounded) power tools. Double insulated tools are equipped
with a polarized plug (one blade is wider than the other). This
plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a polarized outlet. Do
not change the plug in any way. Double insulation eliminates
the need for the three wire grounded power cord and grounded
power supply system.
• Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is grounded.
• Do not abuse the cord. Never use the cord for carrying, pulling
CAUTION
WARNING
WARNING
WARNING
WARNING
WARNING
Bekijk gratis de handleiding van Weller WLHG1212A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Weller |
| Model | WLHG1212A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4694 MB |
