Weller WLHG1212A handleiding
Handleiding
Je bekijkt pagina 6 van 32
6
EN
ENGLISH
TECHNICAL DATA
a
c
ø
b
ø 35.5 mm / 1.4 lbs
Heat Gun WLHG1212A
Power consumption (W) 1200
Mains supply (V~)
(Hz)
120
50/60
Heat-up time (min) 3
Temperature (°C /°F)
I
II
350 / 660
550 / 1020
Air ow (l / min, cfm)
I
II
250 / 8.8
400 / 14.1
Dimensions L x W x H mm
inch
230 × 250 × 80
(ø 45)
9.0 × 9.8 × 3.1
(ø 1.8)
Weight (g / lbs) 700 / 1,5
Heat Gun Advanced WLHG1412A
Power consumption (W) 1400
Mains supply (V~)
(Hz)
120
50/60
Heat-up time (min) 3
Temperature (°C /°F)
1 - 9
80 – 600
180 –1120
Air ow (l / min, cfm)
I
II
250 / 8.8
450 / 15.9
Dimensions L x W x H mm
inch
230 × 250 × 80
(ø 45)
9.0 × 9.8 × 3.1
(ø 1.8)
Weight (g / lbs) 700 / 1,5
Wear appropriate protective clothing to protect yourself
against burns. Protect your eyes by wearing eye protection.
Never work on voltage-carrying parts.
Avoid unintentional operation. Disconnect the soldering tool
from the power supply while not in use.
The power cable must only be plugged into the power socket
or adapter approved for this purpose. Check that the power
supply voltage is compatible with the connected load of the
tool.
Before use check machine, cable, and plug for any damages
or material fatigue.
Please contact our Customer Service: technical-service@
weller-tools.com
If the power tool‘s supply cord is damaged, it must be repla-
ced with a specially prepared supply cord.
Fire and explosion hazard! Risk
of burns!
• Take care if using the device in the vicinity of combustible
materials. Do not direct the device towards the same place
for long periods.
• Do not use the device in rooms with a potentially explosive
atmosphere.
• Do not use the device in rooms in which easily flammable
material or gases may be present.
• Do not leave the appliance unsupervised when it is
switched on.
• Do not use the device outside if it is raining.
• Never cover or close the hot air nozzle.
• Do not point the hot air flow at people.
• Do not use the device as a hair dryer.
• Allow the device to cool down for a while after use before
packing it away.
SAFETY INSTRUCTIONS
Hidden areas such as behind walls, ceilings, oors, covers,
and other panels may contain ammable materials that could
be ignited by the hot air blower when working in these areas.
The ignition of these materials may not be immediately
obvious and could cause property damage and injury. When
working in these areas, keep the hot air blower constantly
moving back and forth. Lingering or pausing in one spot
could ignite the panel or the material behind it.
Persons removing paint should follow these rules:
Lead-based paint should only
be removed by a professional
and not with a hot air blower.
Health hazard!
When removing paint or varnish, paint and varnish resi-
dues can get into your eyes and cause injury.
• Wear appropriate eye protection.
• If paint or varnish residues get into your eyes, ush
them out and seek medical attention immediately.
Once deposited on surfaces, lead can be ingested through
hand-to-mouth contact. Even low levels of lead exposure can
cause irreversible damage to the brain and nervous system;
young children and unborn babies are particularly vulnerable.
Take the workpiece outside. If this is not possible, keep the
work area well ventilated. Open the windows and place an
exhaust fan in front of them. Ensure the fan moves air from
inside to outside.
Be cautious when handling the heat gun. Keep the heat gun
moving, as excessive heat can generate vapors that may be
inhaled by the operator.
WARNING
CAUTION
WARNING
Bekijk gratis de handleiding van Weller WLHG1212A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Weller |
| Model | WLHG1212A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4694 MB |
