Warmup VLo Ultra-12 handleiding
Handleiding
Je bekijkt pagina 4 van 32
4
Please also read the full instructions that follow this section.
Installation summary
• For bonded constructions in dry
areas a high temperature acrylic
adhesive can be used to bond the
Ultra-12panelstothesuboor.
Presstheboardsdownrmly
into the adhesive to create the
necessary adhesion.
• Starting from the manifold
locationttheservicepanels
following the pipe layout shown
on the working drawings.
• For bends use the curve service
panels, snapping or cutting the
straight service panels at 45° and
butting them tightly together.
•Ensurethesuboorisclean,dry
and prepared to an SR1 standard.
Seesuboorconsiderationspage
for more information.
• For bonded constructions in wet
or dry areas and compatible
S1orS2exibletileadhesiveis
recommended.
Presstheboardsdownrmly
into the adhesive to create the
necessary adhesion.
• Fit the curve panels at the end of the room referring to the working
drawings.
• Inlltheheatedareawiththestraightpanels.
• Theplainpanelscanthenbeusedinareaswhereunderoorheatingwill
not be installed, i.e. under kitchen units.
1 2
3 4
5
SR1
2 m < 3 mm
Bekijk gratis de handleiding van Warmup VLo Ultra-12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | VLo Ultra-12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8703 MB |
