Warmup VLo Nexxa-12 handleiding
Handleiding
Je bekijkt pagina 14 van 24
14
Levelling compound used must be compatible with plastic
underlayments such as Nexxa-12. The levelling compound must be
applied as a single layer.
Step 4 - Lay levelling compound
• The 30 mm tall perimeter strip
should nish just proud of the
levelling compound but can be
trimmed back ush with a utility
knife if required.
• Lay the oor covering adhering
to the ooring manufacturers
instructions.
Ensure any oor coverings,
underlays and adhesives used are
suitable for use with underoor
heating at the intended
operational temperatures
and conditions.
• Apply a 22 mm layer of Warmup
levelling compound over the
membrane. The 22 mm layer is
measured from the base of the
membrane.
Refer to the levelling compound
instructions for mixing, drying
and curing information.
2
3 4
• Ensure the membrane is clear of
debris before laying the levelling
compound.
1
Bekijk gratis de handleiding van Warmup VLo Nexxa-12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | VLo Nexxa-12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4711 MB |
