Warmup VLo Econna-12 handleiding
Handleiding
Je bekijkt pagina 11 van 28
11
Step 2 - Install VLo Econna-12
• Apply a 6mm bead of D4 adhesive to the joists.
• Lay the panels in a run, ensuring the end of each panel is on the centre
line of a joist.
• Panels should be laid in a brickbond pattern with a minimum overlap of
800 mm.
• Ensure that each row of panels has a group of return loops at each end.
7
• Secure the panels together using a D4 adhesive on BOTH sides of the
tongue and groove and t together. The panels should then be glued and
screwed to the joists.
8
Bekijk gratis de handleiding van Warmup VLo Econna-12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | VLo Econna-12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6226 MB |
