Warmup Tectora handleiding
Handleiding
Je bekijkt pagina 14 van 28
14
Step 5 - Lay the service pipe
• Plan the circuit layout ensuring
that the ow and return pipes
can connect from the manifold
to their respective heated area
without crossing each other.
1 2
If the project has been supplied with a set of working drawings, follow
the provided pipe layout. Ensure each circuits details are recorded in the
commissioning log provided in the Warmup manifolds installation manual.
• First install the service pipe in the
joist location, ensuring there is
excess ow and return pipe at the
manifold location which can be
cut later after the pipe has been
laid.
• Use Warmup pipe bend supports
and Warmup clips where the pipe
exits the oor at the manifold
location.
• Secure the pipe to the insulation layer using Warmup clips after the bend
supports and then every 500mm.
• Secure bends in the pipe at the beginning, middle and end of the turn.
3
Bekijk gratis de handleiding van Warmup Tectora, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | Tectora |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8419 MB |
