Warmup Metro handleiding
Handleiding
Je bekijkt pagina 5 van 28
5
Installation summary
• Lay your chosen screed directly
over the heating system in
accordance with manufacturer
instructions, building regulations
and standards taking care not to
damage the pipe.
• Use Warmup pipe bend supports
to hold the ow and return pipe
at a 90° angle as it exits the oor
towards the manifold.
• Lay your chosen oor covering
once the screed layer has cured
and dried, in accordance with
oor manufacturers instructions.
• Install your Warmup
thermostat referring to their
installation instructions. The
system must be connected
to and controlled with a
thermostat and sensor.
• Install the oor sensor centrally
between the two closest parallel
runs of pipe�
• Measure and cut the pipe so
that it reaches both the ow and
return ports on the manifold.
• Refer to the manifold manual
for detailed information on
mounting, pressure testing and
commissioning.
6 7
98
10 11
DO NOT tape over the sensor
tip. It must be fully embedded
within screed being laid over.
Bekijk gratis de handleiding van Warmup Metro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | Metro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7455 MB |
