Warmup 7iE Matter handleiding
Handleiding
Je bekijkt pagina 7 van 22
7
Welcome to the 7iE
Getting Started
Thu 11 Mar 17:00
23.0° until 11:30
18.0° limit
Floor
+
21.0
22.0°
Thu 11 Mar 17:00
23.0° until 11:30
18.0° limit
Floor
+
21.0
22.0°
Thu 11 Mar 17:00
23.0° until 11:30
18.0° limit
Floor
+
21.0
22.0°
Back
Menu
Mode
Program
Energy Monitor
Settings
Mode
Program
Manual
Heating O
With Frost Protection
Holiday
Back
Heating Indicator
Displays when heating is active
Error Messages
See Troubleshooting Page
How to quickly change
the temperature
How to quickly change mode
Current Floor/Air temperature
Floor will be displayed if oor sensor is
installed and switched on
Temporary Override
Use the slider or press the +/- icons
to set a temporary override until next
heating period
Target Temperature
Temperature you wish the
thermostat to achieve
Weather
7-day forecast for your area
Menu
Air limit
Will only be displayed when in oor
mode and an air limit is set.
See Appendix 1.0 for alternative
thermostat use cases
Use the slider or press the +/- icons to
change your target temperature.
If in “Program” mode this will set a
temporary override until your next
heating period.
If in “Manual” mode this will set a xed
target temperature.
Once the target temperature is set
above current oor/air temperature
the heating indicator will appear.
Mode select allows you to quickly change from program, manual or holiday modes. You
can also switch “Frost Protection” on or simply switch the “Heating O” from here. Frost
protection will ensure that the oor/air temperature does not drop below 7.0°.
7iE
Temperature
Override
Bekijk gratis de handleiding van Warmup 7iE Matter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | 7iE Matter |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 4000 MB |
