Warmup 7iE Matter handleiding

22 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 3 van 22
3
Safety Information
Step 1 - Installation
The 7iE must be installed by a qualied electrician. It requires a
permanent 230 V AC supply from a 30mA RCD or RCBO protected circuit
in accordance with the current edition of the BS7671 Wiring Regulations.
Isolate the 7iE from the mains supply throughout the installation process.
Ensure that wires are fully inserted into the terminals and secured, free
strands should be trimmed, as they could cause a short-circuit.
Install the 7iE in an area with good ventilation. It should not be beside a
window/door, in direct sunlight or above another heat generating device
(e.g. radiator or TV).
Ensure the distance from your router to the 7iE is not excessive. This
will ensure the wireless connection is not subject to range issues once
installed.
q
q
q
q
For bathroom installations the 7iE MUST be mounted outside of Zones 0,
1 and 2. If this is not possible then must be installed in an adjacent room,
controlling the rooms using remote sensor(s).
The 7iE and its packaging are not toys; do not allow children to play with
them. Small components and packaging present a risk of choking or
suocation.
The 7iE is suitable for indoor use only. It must not be exposed to moisture,
vibrations, mechanical loads or temperatures outside of its rated values.
For safety and licensing reasons (CE/UKCA), unauthorised change and/or
modication of the 7iE is not permitted.
q
q
q
q
Isolate the 7iE supply from the mains supply.
Install a 50 mm deep electrical back box
in your preferred thermostat location.
Pull wires (heater, supply and sensor(s)
through back box and complete terminal
wiring.
Unclip the display from the power base.
Release the display as shown.
2
1
1
3
2
4
230 V AC: 50Hz
Sensor
Heaters. Max. 16A
(3,680W)

Bekijk gratis de handleiding van Warmup 7iE Matter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkWarmup
Model7iE Matter
CategorieThermostaat
TaalNederlands
Grootte4000 MB