Wagner GM 5020EAW handleiding
Handleiding
Je bekijkt pagina 43 van 136
43
OPERATING MANUAL
VERSION 02/2018 ORDER NUMBER DOC 2366717
6 ASSEMBLY AND COMMISSIONING
6.1 TRAINING OF ASSEMBLY/COMMISSIONING STAFF
The assembly and commissioning sta must have the technical skills to safely commission
the device.
When assembling, commissioning and carrying out all work, read and follow the operating
manuals and safety regulations for the additionally required system components.
A skilled person must check to ensure that the device is in a reliable state after it is installed
and commissioned.
6.2 STORAGE AND INSTALLATION CONDITIONS
Until the point of assembly, the device must be stored in a dry location, free from vibrations
and with a minimum of dust. The device must be stored in closed rooms.
For ambient temperature and air humidity, see Chapter 5.5.1.
Long-term storage
See Chapter 8.1.5.
For recommissioning, proceed according to following chapters.
6.3 TRANSPORTATION
For underframe with rolls: The device can be moved on the rollers for short
distances.
Without underframe: The device can be transported using a pallet jack.
Use the recessed area on the underside of the cabinet for this purpose.
B_05901
WARNING
Inclined ground!
Risk of accidents if the device rolls away/falls.
Place the device on horizontal oor.
The wheels should be xed or replaced by leveling feet and secured.
Do not tilt the device during shifting / transporting.
Bekijk gratis de handleiding van Wagner GM 5020EAW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wagner |
| Model | GM 5020EAW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17100 MB |
