Wachendorff WDGA 58S handleiding
Handleiding
Je bekijkt pagina 33 van 34
Technical Manual
WDGA with IO-Link
4 - IO-Link
© Wachendorff Automation GmbH & Co. KG
27
4.6.2 Window mode
The 'switching' behaviour of the window mode is shown in Figure 4.3. The switching
state changes when the measured value exceeds or falls below the value set in SP1
or SP2. The hysteresis is considered here and shows symmetrical behaviour for both
setpoints.
Figure 4.3: Window mode
4.6.3 Two-point mode
In Figure 4.4 and Figure 4.5 the 'switching' behaviour of the Two Point mode is shown.
The switching state changes when the measured value exceeds or falls below the
value set in SP1. The switching state also changes when the measured value exceeds
or falls below the value set in SP2, depending on the counting direction.
Figure 4.4: Two point mode increasing
Figure 4.5: Two point mode decreasing
Bekijk gratis de handleiding van Wachendorff WDGA 58S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wachendorff |
| Model | WDGA 58S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5087 MB |
