Wachendorff WDGA 58S handleiding
Handleiding
Je bekijkt pagina 21 van 34
Technical Manual
WDGA with IO-Link
4 - IO-Link
© Wachendorff Automation GmbH & Co. KG
15
0x80
Device reset
A warm start is performed and the
device is set to initial mode.
Communication is interrupted by the
device and restored by the master.
0x81
Application reset
The device parameters are set to the
default values. Identification
parameters remain unaffected. An
upload to the master's data storage is
carried out if this is activated.
0x82
Restore factory settings
All device parameters are reset to the
default settings.
The values stored in the data storage
can be downloaded after the power
reset.
0x83
Back-to-box
All device parameters are reset to the
default settings and communication is
suspended until the next power reset.
Note: If you carry out this reset, the
device should be disconnected from the
master after it has been carried out.
0xA0
Reset Maintenance
Resets all maintenance parameters like
remanent errors, min/max temperature
since startup, ...
0xAF
Ping
LED changes to Device Discovery Blink
pattern. See 3.5
0xE0
Teach In Zero Point
Updates position value to the value that
is stored in index 0x00C2
(Measurement Preset)
Table 4.4: System commands
Bekijk gratis de handleiding van Wachendorff WDGA 58S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wachendorff |
| Model | WDGA 58S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5087 MB |
