Vulcan VJV10AL handleiding
Handleiding
Je bekijkt pagina 8 van 52
8
« »Never dispose of batteries in water.
«Read this instruction before switching on the power
supply and starting the work.»
« »Never dispose of batteries in fire.
«Protect the battery against heat, e. g., against
continuous intense sunlight.»
« »For indoor use only.
screw thread. When the screw is to be driven within the vicinity of the
material edge the pilot borehole prevents from undesired chipping of the
material.
If the screw is driven with abnormal difficulty the screw must be retracted
and the pilot borehole diameter should be enlarged.
Anyway, when problem to drive the screw in persists (e.g. in case of hard
wood grades) try to use a lubricating agent (e.g. liquid soap). Press the
tool to the screw with sufficient force to avoid spontaneous rotation of the
driving bit in the screw head. Use only those bits that accurately match
the bit head. When the screw head is damaged further driving the screw
in or out may prove infeasible.
STORAGE AND MAINTENANCE:
The tool in principle does not require any special maintenance or service.
The tool must be stored in a place that is not accessible to children and
must be kept clean and protected from moisture and dust. The storage
conditions should prevent potential mechanical damage and impact of
the weather conditions.
CAUTION: Remember to always disconnect the battery from the tool prior
to starting the cleaning operations and unplug the charger from the outlet.
The charger may be cleaned exclusively with use of a dry cloth. Use also a
clean cloth to clean regularly the ventilation openings of the tool to keep
them patent. From time to time disassemble the and remove dust chuck
and other rubbish from the interior.
The tool housing must be cleaned with use of a moistened cloth small
quantity of soap and then wiped dry. Do not use any detergents or
solvents as they can damage parts made from plastics. After cleaning let
the tool dry completely before it is used again.
TRANSPORTATION:
Store and transport the tool in its transport box to protect it against
humidity, dust penetration and small objects; remember to protect its
ventilation openings. Small objects after getting into the casing can
result in damage to the motor.
If the battery is removed for transport or storage, make sure the contacts
will not short circuit. Remove metal items such as screws, nails, clasps,
loose bits, wires, or metal filings from the case or transport container or
otherwise prevent them from touching the battery.
MANUFACTURER:
PROFIX Co.Ltd.,
34 Marywilska Street,
03-228 Warsaw, POLAND.
This appliance is in conformity with national and European standards as
well as with general safety guidelines.
NOTE: In case of technical issues, contact an authorised technical service.
Any repairs are allowed to be carried out exclusively by qualified staff with
use of original spare parts.
PICTOGRAMS:
Explanation of the icons located on the nominal plate and the
information tags:
PROTECTION OF THE ENVIRONMENT:
NOTE: The symbol nearby denotes that old equipment must
never be thrown away together with other waste (with the
penalty of a fine). Hazardous components of electronic
equipment may adversely affect the natural environment and
human health.
Each household may contribute to the recovery and reuse (recycling) of
old machinery and equipment. Both in Poland and Europe a system for
recovery of used equipment either exists or is being created. The system
obliges all organizations that sell such equipment to collect the used
machinery and appliances. Moreover, general purpose collecting points
for such equipment are available.
TROUBLESHOOTING GUIDE:
PROBLEM POSSIBLE CAUSE REMEDY
Irregularities of the motor
operation.
Worn carbon brushes of the motor.
Have the brushes replaced at a service workshop.
The tool (drill/screwdriver)
fails to operate.
No power voltage, damaged
motor or the power trigger.
Check the battery status, recharge or replace with a new one when necessary.
When the problem persists hand over the tool for repair at a service workshop.
Please refer to the warranty sheet for addresses of authorized workshops.
Battery low. Recharge the battery.
The policy of the PROFIX company consists in permanent improvements of the offered products and therefore the company
reserves the right to make amendments to the product specification without a prior notice. The images included into the
operation manual are only of the exemplary nature and may slightly differ from actual appearance of the device
purchased.
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.
Bekijk gratis de handleiding van Vulcan VJV10AL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vulcan |
| Model | VJV10AL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9934 MB |
