Vulcan C24EO3AF handleiding
Handleiding
Je bekijkt pagina 9 van 43
COMPONENT PANEL
COMPONENTS
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1. Remove right side panel as outlined under
COVERS AND PANELS.
2. Disconnect lead wires to component being
replaced.
Fig. 5
3. Remove component.
4. Reverse procedure to install replacement
component and check steamer for proper
operation.
NOTE: If replacing temperature control, see in
SERVICE PROCEDURES AND ADJUSTMENTS.
TIMER
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1. Remove right SIDE PANEL.
2. Disconnect lead wires to timer.
Fig. 6
3. Remove timer knob.
4. Remove rotary shaft seal from timer shaft and
remove timer.
Fig. 7
5. Reverse procedure to install and check steamer
for proper operation.
HOLD THERMOSTAT
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1. Remove right SIDE PANELS.
2. Remove lead wires and mounting nuts.
C24EO SERIES ELECTRIC COUNTERTOP STEAMERS - REMOVAL AND REPLACEMENT OF PARTS
Page 9 of 43 F25386 Rev. C (0421)
Bekijk gratis de handleiding van Vulcan C24EO3AF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vulcan |
| Model | C24EO3AF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15986 MB |
