Vulcan C24EO3AF handleiding
Handleiding
Je bekijkt pagina 17 van 43
DOOR
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1. Close door.
2. Remove left SIDE PANEL.
3. Remove nuts from upper hinge located inside
front panel.
Fig. 33
4. Open door slightly, and while holding door, pull
upper hinge away from front panel.
5. Pull upper hinge out of upper door hinge bushing.
6. Lift door assembly up and off lower door hinge.
7. Reinstall parts removed in reverse order of
removal.
8. Check door for fit and proper sealing of gasket.
DOOR GASKET
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1. Open door.
2. Remove the shoulder screws and pan pusher
bracket from gasket plate.
Fig. 34
3. Remove gasket plate.
4. Remove gasket from inner door panel.
5. Remove RTV from bottom part of inner door
panel. Apply new RTV 109 to bottom of door
where shown when assembling gasket to door.
Fig. 35
6. Place a small amount of RTV109 into the inner
door panel gasket screw holes before assembly.
7. Position the new gasket on gasket plate and
reverse procedure to install.
DOOR HANDLE
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
REMOVAL
1. Open door.
2. Remove screws from top and bottom of door
assembly.
C24EO SERIES ELECTRIC COUNTERTOP STEAMERS - REMOVAL AND REPLACEMENT OF PARTS
Page 17 of 43 F25386 Rev. C (0421)
Bekijk gratis de handleiding van Vulcan C24EO3AF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vulcan |
| Model | C24EO3AF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15986 MB |
