Vulcan C24DA10 handleiding
Handleiding
Je bekijkt pagina 19 van 65
Fig. 33
20. Move any interfering components out of the way,
then push generator slightly forward to
disengage feet and remove generator from rear
of cabinet.
21. Reverse procedure to install generator.
FILL AND COLD WATER SOLENOID
VALVES
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1. Turn off water supply to steamer.
2. Remove FRONT AND SIDE COVERS.
PREVIOUS PRODUCT SHOWN
Fig. 34
3. Pull quick connect power leads off solenoid valve
being serviced.
4. Disconnect water lines to solenoid valve being
serviced and remove solenoid valve from unit.
Fig. 35
CURRENT PRODUCTION SHOWN
C24GA AND C24DA SERIES CONVECTION STEAMER - REMOVAL AND REPLACEMENT OF PARTS
Page 19 of 65 F35425 Rev. E (0119)
Bekijk gratis de handleiding van Vulcan C24DA10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vulcan |
| Model | C24DA10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16865 MB |
