Vulcan C24DA10 handleiding

65 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 13 van 65
5. Reverse procedure to install. When installing the
spacers, the smaller diameter fits into the slot in
the door and the latch. Use Loctite 271 to secure
fasteners.
Handle Installation
1. Apply Lubriplate 630AA around slots of outer
door housing where step spacers contact
housing.
2. Install door handle into outer door housing such
that hinge side of door housing is to the left and
arrow on handle is pointed upward.
3. Install step spacer with smaller radius toward
handle and door housing. Smaller radius is a slip
fit with outer door housing slot.
Fig. 13
4. Install lock nuts and tighten until no gap exists
between handle, step spacer and lock nut. Do not
over-tighten lock nuts.
5. Close inner door panel so that latch mechanism
engages striker on front panel.
6. Install outer door housing onto inner door panel.
7. Align the top and bottom screw holes of outer
door housing with inner door panel.
Fig. 14
8. Apply Loctite 7471 Primer N and Loctite 242 to
threads of screws before assembling.
9. Install screws to secure door halves together.
10. Check opening and closing operation of door.
Latch Assembly and Removal
1. Separate outer door housing assembly from
inner door panel as outlined under DOOR
HANDLE REMOVAL.
2. Remove screws securing latch assembly to inner
door panel and remove latch mechanism.
Fig. 15
3. Remove E-clip from latch assembly pins and pull
pins from latch mechanism.
Fig. 16
4. Remove retaining pin from spring pin.
5. Separate sliding bracket from stationary bracket.
C24GA AND C24DA SERIES CONVECTION STEAMER - REMOVAL AND REPLACEMENT OF PARTS
Page 13 of 65 F35425 Rev. E (0119)

Bekijk gratis de handleiding van Vulcan C24DA10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkVulcan
ModelC24DA10
CategorieNiet gecategoriseerd
TaalNederlands
Grootte16865 MB