Vortex Impact 4000 handleiding
Handleiding
Je bekijkt pagina 17 van 37
32 33
IMPACT
®
4000
Map Tab
From the Map tab, you may locate your current position by
clicking . For best results, make sure the Impact
®
4000 is
calibrated correctly. See page 9-11 for instructions on how to
calibrate your Impact
®
4000.
While on this tab, you can use the shooter icon
to drop
a pin to denote your location and the target icon to drop
pins for your target’s locations. You may also use the Impact
®
4000 to range a target, which will then drop a pin on the
map representing that target’s position.
Use your finger to move the cursor around the map screen.
You will be shown the distance and direction of that point
from your position if you have dropped the shooter position
pin. If you have dropped target pins, you may click on each
one to see the calculated ballistic solution on the bottom of
the screen.
If your target position is far enough to show your
GeoBallistics
®
Overlays, they will appear using a black
dashed line (Max Vital Range), red dashed line (Energy
Threshold), and yellow dashed line (Velocity Threshold).
You can save the pin positions to your range card folders by
clicking floppy disk icon
or export them to your Comp tab
by clicking export icon . You can also change the map view
to either topographical, road view, hybrid view, or satellite
view by pressing the map icon .
Comp Tab
From the Comp tab, you may manually enter shot Angle,
Direction, and Range. This information can also be
populated with data from the Impact
®
4000.
On this screen, you can begin building out your range card.
Make sure you have the desired rifle profile selected from the
Rifles page. The selected profile is shown next to the (A-J)
designation depending on how your profiles are sorted.
Once the desired values for shot angle, shot direction, and
range are populated, press the +TARGET button to save the
ballistic solution for that situation. You will see the ballistic
solution appear at the bottom of the screen.
Repeat this process for additional targets if desired. By
clicking the “Edit” button, you can modify the input
parameters for an individual target entry by clicking the box
next to the entry or all entries at once by clicking the box
next to “Select All Targets”. You may also re-order the target
entries by either pressing the up and down arrows or by
typing the order number in the space provided. Click “Save”
to save your changes. You can also click “Clear” to delete
all target entry data.
Once you have at least one target entry saved, you may modify
the Holdover Setting by clicking
or . This setting can be
used to set the elevation value on your reticle that you plan to
use as a holdover. For example, if you add a suppressor to a
gun that is already zeroed and it changes your point of impact
by .5 MRAD in the downward direction but do not want to re-
zero your optic, you can change your Holdover Setting to - .5
to update your drop chart to reflect the change in zero.
Once you’ve created your range card, you can save the data to your Range Card folders by clicking save
or export the data to several options by clicking . Range Cards saved to the Impact
®
4000 Range Cards
Folder will be automatically synced with your Impact
®
4000.
Bekijk gratis de handleiding van Vortex Impact 4000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vortex |
| Model | Impact 4000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18360 MB |
