Vortex Impact 4000 handleiding
Handleiding
Je bekijkt pagina 13 van 37
24 25
IMPACT
®
4000
Add
The Add screen is where you can add devices to your network. The Impact
®
4000 will automatically find
all compatible devices on the Vortex Relay
™
Network that are turned on and within Bluetooth
®
range
(approximately 30 feet) that are not already connected to another network. Select the device from the list that
you wish to add. When the new device joins the network, if the profiles or range cards are different, you will
be asked on both devices which device’s information should be used. Repeat to add any additional devices.
Note: When adding a Bluetooth
®
Remote to your Impact
®
4000 device, it will automatically pair and control your device.
Remove
The Remove screen is where you can remove devices from your
network. Select the device you wish to remove from the network.
Note: You can remove your Impact
®
4000 device from your network. You
would need to do this if you are shooting with a friend and wish to join their
network or if you sell or lend your Impact
®
4000 to someone else.
Connect Remote
The Connect Remote screen is where you can control which device your Bluetooth
®
Remote is paired to.
Before doing so, you must make sure to add the Bluetooth
®
Remote to your network via the Add screen.
Select your remote, and then select which device you’d like to connect your remote to. Connected devices
will be denoted with an arrow. Return to the Connected Devices Menu to select which source you’d like to
provide which information.
Blinking Red
•
Not On a Network
Blinking Orange
• On a Network
• Not Connected to
a Device
Blinking Green
• On a Network
• Communicating With
a Device
Note: When the Bluetooth
®
Remote blinks red, it is not on a network. When it blinks orange, it is on a network, but not
connected to any other device. When it blinks green, it is on the network and communicating with another device on
the network.
Note: You are not able to connect the remote to control the GeoBallistics
®
App.
To manually disconnect the Bluetooth
®
Remote from the Impact
®
4000, but keep it on the network, press
and hold the remote’s “Left Arrow” button and “Right Arrow” button together for three seconds.
The Bluetooth
®
Remote can also be disconnected from the network manually by pressing and holding the
remote’s “Up Arrow” button and “Down Arrow” button together for three seconds.
Ballistics
Once you have connected your devices to your network, select “Ballistics” on the Connected Devices
Menu and select which device’s on-board solver you’d like to provide ballistics. The selected device will
be denoted with an arrow.
Bekijk gratis de handleiding van Vortex Impact 4000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vortex |
| Model | Impact 4000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18360 MB |
