Vonroc S_JS506DC handleiding
Handleiding
Je bekijkt pagina 8 van 124
8
EN
WWW.VONROC.COM
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Model No
Batteries
included
Chargers
included
JS506DC
- -
S_JS506DC
CD828AA
CD830AA
S2_JS506DC
2 x CD828AA
CD830AA
S3_JS506DC
CD829AA CD830AA
Machine information
Rated voltage
20V
No load speed 0-2700/min
Saw stroke 20mm
Max. saw capacity wood 0° 80mm
Max. saw capacity steel 0° 5mm
Weight 1.7 kg
Sound pressure level LPA 85.0 dB(A), K=3dB(A)
Sound power level LWA 96.0 dB(A), K=3dB(A)
Vibration ‘sawing sheet metal’ 6.148 m/s2 K=1.5 m/s2
Vibration ‘sawing plywood’ 5.860 m/s2 K=1.5 m/s2
Model No. CD828AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 2.0 Ah
Recommended charger CD830AA
Weight 0.3 kg
Model No. CD830AA
Charger input
220-240V, 50-60Hz,
Max. 1.5A
Charger output 21.5V
4A
Charging time 2Ah battery 35 minutes
Charging time 4Ah battery 60 minutes
Recommended batteries CD828AA, CD829AA
Weight 0.36 kg
Model No. CD829AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 4.0 Ah
Recommended charger CD830AA
Weight 0.65 kg
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other batte -
ries could cause serious injury or damage the tool.
CD828AA 20V, 2Ah Lithium-Ion
CD829AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD830AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardized test given in EN 62841; it may be used
to compare one tool with another and as a prelimi-
nary assessment of exposure to vibration when using
the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
1. Lock-off button
2. On/off switch
3. Handle
4. Battery
5. Battery unlock button
6. Pendulum action switch
7. Protection pin
Bekijk gratis de handleiding van Vonroc S_JS506DC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vonroc |
| Model | S_JS506DC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14997 MB |
