Vonroc OT504DC handleiding
Handleiding
Je bekijkt pagina 7 van 108
EN
7
WWW.VONROC.COM
• Never put the machine down on a table or a
workbench before it has been switched off.
• Regularly clean the ventilation slots. Risk of
electric shock.
SAFETY WARNINGS FOR BATTERY
a) Do not open the battery. Danger of short-
circuiting.
b) Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
c) In case of damage and improper use of the bat-
tery, vapours may be emitted. Ventilate the area
and seek medical help in case of complaints.
The vapours can irritate the respiratory system.
d) Use the battery only in conjunction with your
Vonroc product. This measure alone protects
the battery against dangerous overload.
e)
The battery can be damaged by pointed objects
such as nails or screwdrivers or by force applied
externally. An internal short circuit can occur and
the battery can burn, smoke, explode or overheat.
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only CD828AA and CD829AA type rechargea-
ble Battery packs with the charger. Other types of bat-
teries may burst causing personal injury and damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction.
b) Children being supervised not to play with the
appliance.
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
ELECTRICAL SAFETY
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm
2
. If you use a ex-
tension cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
Your multitool has been designed for light sanding,
sawing and scraping applications.
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Model No. OT504DC
S_
OT504DC
S2_
OT504DC
S3_
OT504DC
Batteries included - CD828AA
2 x
CD828AA
CD829AA
Chargers included - CD802AA
Voltage 20V
No load speed 7000-19000 /min
Weight 0.96 kg
Sound pressure
LPA
84.6 dB(A)
Acoustic power
LWA
95.6 dB(A)
Uncertainty (K) 3 dB(A)
Vibration (sawing
in steel)
16.22 m/s
2
Uncertainty (K) 1.5 m/s
2
Model No. CD828AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 2.0 Ah
Weight 0.4 kg
Model No. CD829AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 4.0 Ah
Weight 0.658 kg
Bekijk gratis de handleiding van Vonroc OT504DC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vonroc |
| Model | OT504DC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13148 MB |
