Vonroc CT504CA handleiding
Handleiding
Je bekijkt pagina 3 van 56
EN
3
WWW.VONROC.COM
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Wear hearing protection.
The product is in accordance with the
applicable safety standards in the European
directives.
SPECIAL SAFETY INSTRUCTIONS
• Warning! The compressor may only be used in
suitable rooms (with good ventilation and an
ambient temperature from 0°C to +40°C).
• Do not perform any actions on the compressor
without first having taken the plug out of the
plug socket.
• Do not aim water jets or jets of flammable
liquids at the compressor.
• Do not place flammable objects near the
compressor.
• Switch the switch (3) to the “0” position (OFF)
during dwell time.
• Never aim the air jet at persons or animals.
• N.B.: some parts of the compressor such as the
head and the feed-through pipes may reach
high temperatures. Do not touch these parts to
avoid burns.
• Transport the compressor by lifting it or by
using the special grips or handles.
• Children and animals should be kept far away
from the area of operation of the machine.
• If you use the compressor to spray paint:
a) Do not work in enclosed spaces or near
naked flames.
b)
Make sure that the environment in which you
will be working has dedicated ventilation.
c) Protect your nose and mouth with a
dedicated mask.
• Do not use the compressor when the electrical
cable or the plug is damaged, and instruct an
authorized Support Service to replace them with
an original part.
• When the compressor is placed on a surface
higher than the floor, it should be secured to
prevent it from falling down during operation.
• Do not put objects or your hands in the pro-
tective covers to avoid physical damage and
damage to the compressor.
• Do not use the compressor as a blunt instru-
ment against persons, objects or animals in
order to prevent serious damage.
• If the compressor is no longer in use, always
take the plug out of the plug socket.
• Always make sure that compressed-air hoses
are used for compressed air and which are
characterized by a maximum pressure adjusted
to that of the compressor. Do not try to repair
the hose if it is damaged.
SAFETY INSTRUCTIONS FOR WORKING WITH
COMPRESSED AIR NAILERS
• The compressor and hoses can get very hot
during operation. Touching them can cause
burns.
• The gases or vapors sucked in by the com-
pressor intake must be kept free of admixtures
that could lead to fires or explosions inside the
compressor.
• When removing the hose coupling, always hold
the hose coupling firmly to avoid injury caused
by the hose flying off .
• When working with the tacker, wear Goggles
and hearing protection. Foreign bodies and
blown out particles can easily cause injuries.
• Do not direct the blow-out gun at people or use
it to clean clothing you are wearing.
Replacing cables or plugs
Immediately throw away old cables or plugs when
they have been replaced by new ones. It is dange-
rous to insert the plug of a loose cable in the wall
outlet.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The minimum
conductor size is 1.5 mm2. When using a cable reel
always unwind the reel completely
Read the user manual.
Bekijk gratis de handleiding van Vonroc CT504CA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vonroc |
| Model | CT504CA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5938 MB |
