Voltcraft EL-1200 handleiding
Handleiding
Je bekijkt pagina 32 van 38
2
will switch once between the T1 value and T2 value. Each time the load
receives a “SHIF+.” trigger command, it will perform a single switching
action. The diagram below shows a schematic of the operation interface in
this mode.
4.12 Compensation Function
When the electronic load operates with high current, significant voltage
drops can occur across the connection cables between the load and the
device under test (DUT). To ensure measurement accuracy, the electronic
load provides a pair of remote compensation terminals. Users can use
these terminals to sample the precise output voltage of the DUT.
Operating Steps:
1. In the system parameter settings page, locate the remote
compensation (RComp) option and select "Rear". Press confirm to
enable the remote compensation function. At this point, the remote
sampling voltage will be used as the actual detected voltage.
2. Return to the parameter settings page and select the remote
compensation (RComp) option as "Front." This will disable the remote
compensation function for the rear terminal, and the load will measure
the voltage at the main front-panel binding posts as the actual voltage.
Note:
After enabling rear remote compensation, ensure correct polarity
connections between the DUT and the terminals. Do not leave
connections floating or reverse the polarity! Do not switch the sense mode
while the system is running!
Bekijk gratis de handleiding van Voltcraft EL-1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Voltcraft |
| Model | EL-1200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4048 MB |
