Vollrath 6958304 handleiding

Fornuis

Vollrath

4 pagina's

PDF beschikbaar

Handleiding

Item No. 2350197-1 Rev 5/7/2021

www.vollrath.com

The Vollrath Company, L.L.C.

1236 North 18th Street

Sheboygan, WI 53081-3201

U.S.A.

Main Tel: 800.628.0830

Fax: 800.752.5620

Technical Services: 800.628.0832

Service Fax: 920.459.5462

Canada Service: 800.695.8560

troubleShooting

Problem It might be caused by Course of Action

The power level is ashing in the display window. There is not a pan on the heating surface. Place an induction ready wok pan on the heating

surface.

The unit turned off after 10 minutes. There is not a pan on the heating surface. Place an induction ready wok pan on the heating

surface.

The unit is on, but not heating.

F-9 (Bad Pan - F9)

The wok pan may be too small or may not be

induction-ready.

Make sure the wok pan is induction ready. See the

FUNCTION and PURPOSE of this manual.

The unit suddently stopped working.The digital

display is ashing one of the following error

messages:

Remove cookware. Let cooking surface cool.

Clear any obstructions to the air intake. When the

overheat condition has cleared, the unit will return

to normal function.

F-2 (Too Hot - F2)

The overheat-protection feature may have

activated.

F-8 (Bad Flow - F8)

The unit may be too close to an external heat

source or the air intake may be restricted.

F-4 (Heatsink - F4)

The overheat-protection feature may have

activated.

F-5 (Heat Therm - F5)

The overheat-protection feature may have

activated.

SerVice and rePair

There are no user serviceable parts within this appliance. To avoid serious injury or damage, never attempt to repair the unit or replace a damaged power cord

yourself. Do not send units directly to The Vollrath Company LLC. Please contact Vollrath Technical Service from the list below.

VOLLRATH Technical Service • 1-800-628-0832 • Email: techservicereps@vollrathco.com

When contacting Vollrath Technical Service, please be ready with the item number, model number (if applicable), serial number, and proof of purchase showing

the date the unit was purchased.

To maintain the appearance and increase the service life, clean your Induction Wok daily.

1. Let the unit cool until the Display no longer shows “HOT” and unplug the unit.

2. Wipe the exterior of the induction wok with a clean damp cloth.

NOTICE: Do not use abrasive materials, scratching cleansers or scouring pad to clean the unit. These can damage the nish.

NOTICE: Do not spray controls or outside of unit with liquids or cleaning agents.

3. Thoroughly wipe off any mild soap or chemical cleaners. Residue could corrode the surface of the unit.

Bekijk gratis de handleiding van Vollrath 6958304, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.