Handleiding
Je bekijkt pagina 3 van 4
3
ENGLISH
OperatOr’s Manual
3. Insert the Induction Wok into the cutout.
4. Plug the power cord into a grounded electrical outlet with the matching
nameplate rated voltage.
NOTICE: Using a voltage other than the nameplate rated voltage will
cause damage to the unit. Incorrect voltage, modication
to the power cord or electrical components can damage
unit and will void the warranty
oPeration
WARNING
Electrical Shock Hazard.
Keep water and other liquids from entering the
inside of the unit. Liquid inside the unit could cause
an electrical shock.
If liquid spills or boils over onto the unit, immediately unplug the unit
and remove cookware. Wipe up any liquid with a padded cloth.
CAUTION
Burn Hazard.
Do not touch cookware, heating surface, food, or
liquid while heating.
Hot food and liquids can burn skin. Induction heating surfaces heat
rapidly. Use caution when adding food to pre-heated oil, liquid, or other
food already in the cookware.
1. Place the included 14” carbon steel wok in the center of the heating
surface.
2. Place oil or food in the wok.
NOTICE: Do not heat empty cookware. Because of the speed and
efciency of the induction range, cookware can quickly
overheat and be damaged.
NOTICE: Do not drop cooking utensils or other objects onto the
cooking surface. The strong, non-porous surface can
break. The warranty does not cover this type of abuse.
3. Press the ON/OFF button. The Power LED will illuminate. The
Induction Wok will default to power level 50, or the power level setting
the last time the wok was used.
The display window should remain constant during operation. If the
display is ashing, see the Troubleshooting section in this manual.
B
A
C
D
E
F
Countertop Control Shown
B
A
C
D
E
F
Remote Control Box Panel Shown
A
ON/OFF button - Press to turn unit ON/OFF.
B
Power LED - Illuminates when the power is ON.
C
Display panel - Displays the power level.
D
Down button - Press to decrease the power level.
E
Up button - Press to increase the power level.
F
Turbo button - Press to rapidly change the power to the highest
setting.
Adjusting the Power
1. Press the Up button or Down button to increase or decrease the power
level.
2. To rapidly set the highest power level (100) press the Turbo button.
Turning Off the Induction Wok
Press and hold the Power button until the Power LED is no longer
illuminated. The fan will run for approximately 10 minutes to help cool the
Induction Wok. The Display will show “HOT” until the heating surface has
cooled.
Over Heat Protection
The unit is equipped with an “over-heating protection” feature. If the
temperature of the heating surface becomes too hot, the unit will stop
heating. The display will ash “F2” to indicate the unit is in “over-heating
protection” mode. See Troubleshooting for more information.
cleaning
WARNING
Electrical Shock Hazard.
Keep water and other liquids from entering the
inside of the unit. Liquid inside the unit could cause
an electrical shock.
Do not spray water or cleaning products. Liquid could contact the
electrical components and cause a short circuit or an electrical shock.
CAUTION
Burn Hazard.
Do not touch cookware, heating surface, food, or
liquid while heating.
Hot food and liquids can burn skin. Induction heating surfaces heat
rapidly. Allow the heating surface to cool before handling.
Bekijk gratis de handleiding van Vollrath 6958304, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vollrath |
| Model | 6958304 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 942 MB |
