Vocopro STUDIO-C1 handleiding

Niet gecategoriseerd

Vocopro

11 pagina's

PDF beschikbaar

Handleiding

Getting Connected

Connecting the STUDIO-C1 to the Shock Mount Assembly

The included microphone shock-mount is not only designed to protect the sensitive microphone diaphragm, but it is also designed to protect the integrity

of the output signal by suspending it from handling, cable and stand noise. While it is not required to connect the shock mount assembly to the STUDIO-

C1, it is highly recommended to get the most out of your STUDIO-C1 for the longest amount of time.

Follow these instructions below for connecting to the shock mount assembly:

1. Hold the shock mount upside down, being careful not to unattach either of the elastic tension bands from any of the tension hooks.

2. Place the STUDIO-C1 upside down in the interior of the shock mount and align the threading of the STUDIO-C1's exterior with the threading of the

shock mount's fastener, allowing the weight of the shock mount to keep it aligned with the STUDIO-C1.

3. Grasping the STUDIO-C1 as close to below the capsule as possible, twist the shock mounts fastener so it fully threads onto the STUDIO-C1,

securing it tightly.

NOTE: Never use the shock mount when the elastic tension bands are loose. Before and after handling the shock mount with the STUDIO-C1

attached, ensure that the elastic tension bands are attached to all the shock mount's hook locations to ensure proper suspension. Once one of the

elastic tension bands detaches from just one hook, not only does shock mount become imbalanced, but it also increases the likelihood that other

hook attachments are soon to detach.

Connecting the 48V Phantom Power Adapter

All condenser microphones utilize a capacitor that requires an external power feed to function. While some condenser mics utilize a battery powered

cartridge which can sometimes be costly, most condenser mics rely on an external power feed called phantom power. This means that unless your mic

mixer has a 48V phantom power feed, (which is typically only found on professional grade studio boards) you would not be able to use the STUDIO-C1.

So you can start using your STUDIO-C1 right out of the box (no matter what kind of mic mixer you may have), we include an external AC power 48V

phantom power adapter that conveniently connects between your STUDIO-C1 and your mixer.

Connecting the 48V phantom power supply:

1. Connect the supplied AC power cable from the 48V adapter to an available AC outlet, ensuring both ends are secure. You can check if it is properly

connected by turning on the power switch. If the power switch illuminates, it is firmly connected, if is does not illuminate or flickers, turn off the

adapter and reconnect the AC cable ends firmly.

NOTE: Attempting to use the STUDIO-C1 with non-phantom powered mixers without the supplied phantom power adapter will result in no sound

pickup/output.

Shock Mount

Power Adapter

-C1

Elastic Band

STUDIO-C1

Bekijk gratis de handleiding van Vocopro STUDIO-C1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.