Vocopro Media-Jukebox MKII handleiding
Handleiding
Je bekijkt pagina 12 van 26
Video Only using the S-Video Output (Optional accessory S-Video patch cable sold separately)
What you will need:
• 1/8” to S-Video patch cable (Optional accessory sold separately)
• TV, video monitor or other video device with S-Video input
1. Connect the 1/8” end to the S-Video jack on the Media-Jukebox MKII
2. Connect the S-Video end to the S-Video input on a TV, video monitor, etc.
NOTE: When using the RGB outputs, set the VIDEO OUTPUT mode to “YCBCR” in the OSD System Setup menu.
See the System Setup section in this manual for instructions on accessing the System setup menu and
changing the video output mode.
Connecting the Infrared Sensor (Optional accessory sold separately)
The infrared sensor is used to give the remote control a more flexible range.
What you will need:
• 1/8” Infrared Sensor cable (Optional accessory sold separately)
1. Connect the 1/8” end to the IR EXTERNAL jack
2. Place the sensor in an open spot where there are no barriers between it and the remote control
Getting Connected (optional accessories)
RCA Optical
S-video
10
Bekijk gratis de handleiding van Vocopro Media-Jukebox MKII, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vocopro |
| Model | Media-Jukebox MKII |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3378 MB |
