Vocopro Casaman-Wireless handleiding
Handleiding
Je bekijkt pagina 14 van 20
14
Getting Connected
Speakers
Before we get into connecting speakers, there are two important issues to consider: speaker impedance and multiple
speakers.
The Casaman is rated to perform as low as 4Ω (ohms). The Ω (ohms) rating is a measure of the speaker’s impedance.
Basically, the rating tells you how much amplifier power will be passed through
the speakers. For example, a 4Ω (ohms) speaker has less impedance than an 8Ω
(ohms) speaker, and thus will offer less resistance to the flow of energy from the
amplifier. With less resistance, a 4Ω (ohms) speaker will pull more power from the
amplifier than an 8Ω (ohms) speaker will. Since 4Ω (ohms) speakers are capable of
drawing out more of the amplifier’s power, 4Ω (ohms) speakers will play louder than
8Ω (ohms) speakers.
When connecting two speakers to a speaker output, this changes the impedance.
Basically, when two speakers of equal impedance are connected to a speaker
output, the impedance is cut in half. So two 8Ω (ohms) speakers connected to a
single channel now has a 4Ω (ohms) load. Because the Casaman is rated at no
lower than 3Ω (ohms), you can only connect two speakers to a speaker output if
they are 6Ω (ohms) or above.
You can use speaker cable with either bare wire or banana plug ends.
If you are using bare wire, loosen the plastic cap on each speaker connector by turning it counter-clockwise. This exposes the
interior metal rod. You can either stick the bare wire through the hole in the rod, or line it around the rod itself. Then tighten
the cap to secure the connection.
If using banana plugs, first ensure that the plastic caps are fully tightened on the speaker terminals. Connect the speaker
cable by pushing the banana plug onto the speaker output with the pins properly aligned and color matched to ensure proper
polarity. If connecting two speakers, stack the banana plugs.
8Ω 8Ω 4Ω
6Ω 6Ω 3Ω
4Ω 4Ω 2Ω
Speaker 1 Speaker 2
Overall
Impedance
1 2 3
Banana Connector
Single Speaker Two Speakers
Warning: Only to be used with 8Ω (ohms) DO NOT
stack (2x) 4Ω (ohms) speakers.
Warning: The 3Ω (ohms) and 2Ω
(ohms) settings can damage the
Casaman.
Bekijk gratis de handleiding van Vocopro Casaman-Wireless, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vocopro |
| Model | Casaman-Wireless |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1902 MB |
