Vivolink VLVWIP2000-DEC handleiding
Handleiding
Je bekijkt pagina 21 van 34
15 / 27
10, Multicast mode settings: After entering the configuration mode, press the UP/
DOWN button to enter the seventh page with “CA1/CA2” displaying on the LED
screen (CA1 by default). Press and hold UP + DOWN buttons for 5 seconds, then
release to enter the settings mode, in which the Multicast mode (CA1/CA2) on the
LED screen will flash at 1Hz, then press the UP/DOWN button to select the mode,
then press and hold UP + DOWN buttons for 5 seconds to confirm the setting and
stop flashing. After setting, the unit will reboot automatically.
The corresponding multicast mode options are as follows:
CA1: Unicast mode
CA2: Multicast mode
11, Audio return mode settings: After entering the configuration mode, press the UP/
DOWN button to enter the eighth page with “C2C/A2A” displaying on the LED screen
(C2C by default). Press and hold UP + DOWN buttons for 5 seconds, then release to
enter the settings mode, in which the audio return mode (C2C/A2A) on the LED screen
will flash at 1Hz, then press the UP/DOWN button to select the mode, then press and
hold UP + DOWN buttons for 5 seconds to confirm the setting and stop flashing. After
setting, the unit will reboot automatically.
The corresponding audio return mode options are as follows:
C2C: The eARC/ARC or S/PDIF audio from the Decoder is transmitted back to the
HDMI IN or S/PDIF OUT port of the Encoder.
A2A: The analog audio embedded in the Decoder is transmitted back to the AUDIO
OUT analog audio port of the Encoder.
Note:
(1) The audio return mode can not be modified through front panel buttons in
Controller Box or Multicast mode.
(2) Only when both the Encoder and Decoder are correspondingly set to C2C/A2A
audio return mode in unicast mode, the audio return can be realized.
(3) The A2A audio return mode is available only in unicast mode.
(4) When to use ARC, ARC audio amplifier on Encoder HDMI IN port and ARC TV on
Decoder HDMI OUT port should be used.
When to use eARC, eARC audio amplifier on Encoder HDMI IN port and eARC TV
on Decoder HDMI OUT port should be used.
(5) After entering various setting modes, you can hold down the DOWN button to exit
the current interface quickly, or if you do not perform any operation within 5
seconds, it will automatically return to the previous interface.
JPEG2000 AVoIP Encoder and Decoder
Bekijk gratis de handleiding van Vivolink VLVWIP2000-DEC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLVWIP2000-DEC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1508 MB |
