Vivolink VLVWIP2000-DEC handleiding
Handleiding
Je bekijkt pagina 19 van 34
13 / 27
4, Device ID settings: After entering the configuration mode, press the UP/DOWN button
to enter the first page with the current ID number (e.g. 001) displaying on the LED
screen (000 by default). Press and hold UP + DOWN buttons for 5 seconds, then
release to enter the ID settings mode, in which the ID number (e.g. 001) on the LED
screen will flash at 1Hz, then press the UP/DOWN button to select the device ID you
desired (ID range: 000~762), then press and hold UP + DOWN buttons for 5 seconds
to confirm the setting and stop flashing. After setting, the unit will reboot automatically.
Note: The device ID can not be modified in Controller Box mode.
5, Output scaling settings: After entering the configuration mode, press the UP/DOWN
button to enter the second page with “S00” (in which “S” refers to Scaling, and “00” to
resolution ID) displaying on the LED screen (S00 by default). Press and hold UP +
DOWN buttons for 5 seconds, then release to enter the settings mode, in which the
Sxx on the LED screen will flash at 1Hz, then press the UP/DOWN button to select the
ID you desired, then press and hold UP + DOWN buttons for 5 seconds to confirm the
setting and stop flashing.
The scaling settings are listed below:
Scaling Sxx
Resolution Description
S00 bypass
S01
S02
S03
S04
S05
S06
1080P50
1080P60
720P50
2160P24
720P60
2160P30
Scaling Sxx
Resolution Description
S07 2160P50
S08
S09
S10
S11
S12
S13
2160P60
1280x1024
1360x768
1680x1050
1440x900
1920x1200
6, IR mode settings: After entering the configuration mode, press the UP/DOWN button
to enter the third page with “IR2” (in which “IR” refers to IR and “2” to 12V) displaying
on the LED screen (IR2 by default). Press and hold UP + DOWN buttons for 5 seconds,
then release to enter the settings mode, in which the IR mode (IR1 or IR2) on the LED
screen will flash at 1Hz, then press the UP/DOWN button to select the IR mode, then
press and hold UP + DOWN buttons for 5 seconds to confirm the setting and stop
flashing.
The corresponding IR mode options are as follows:
IR1: 5V IR wire
IR2: 12V IR wire
JPEG2000 AVoIP Encoder and Decoder
Bekijk gratis de handleiding van Vivolink VLVWIP2000-DEC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLVWIP2000-DEC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1508 MB |
