Vivolink VLVWIP2000-CTL handleiding
Handleiding
Je bekijkt pagina 22 van 44
Basic Settings
① Name: The name of the Encoder can be changed. (The maximum length
is 16 characters. Special characters are not supported.)
② Change ID: The ID of the Encoder can be set. (ID range:1-762)
Note: Both ID and name can not be duplicated.
③ Power LED: Click the drop-down menu to select the power LED flash
status.
On: The front panel power LED flashes.
On 90s: The front panel power LED is steady on after flashing for 90s.
Off: The front panel power LED is steady on after flash status is turned off.
④ Preview: The preview of the Encoder.
① EDID: Click the drop-down menu to select the EDID for the Encoder.
② Copy EDID: Click the drop-down menu to select a Decoder for EDID copy.
③ Audio: Click the drop-down menu to select the audio source (HDMI/
Analogue).
(1) When HDMI is selected, Encoder HDMI input is the audio source for
Encoder HDMI output and Decoder audio output.
(2) When Analogue is selected, Encoder audio input is the audio source for
Encoder HDMI output and Decoder audio output.
Encoder Configuration
A/V Settings
16/37
Network Settings
① IP Mode: Click the drop-down menu to set the IP mode (Static/DHCP).
② IP Address: The IP address of the Encoder.
JPEG2000 AVoIP Controller
Bekijk gratis de handleiding van Vivolink VLVWIP2000-CTL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLVWIP2000-CTL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4456 MB |
