Vimar RS13 handleiding
Handleiding
Je bekijkt pagina 12 van 32
10
ELECTRICAL CONNECTION
Remove the cover from the electrical
switchboard (Fig. 33) and carry out
the electrical connection as shown in
Fig. 79 in order to check ‘dead man’s
switch’ control to up-and-over door
commands.
WARNING: IPX4 can only be
guaranteed by mounting the rubber
cable fairleads in the electrical
switchboard into the relative container
holes (Fig. 34) and the rounded slotted
wire seal on the cover latch (Fig. 35).
LIMIT SWITCHES ADJUSTMENT
- Position DIP 8 to ON and press the command button on the electrical
switchboard (Fig. 37) to start up-and-over door movement. Release the
button once the operation has been carried out. Slacken the holding
screw for the green cam and turn until activating the microswitch (Fig.
40).
- Tighten the green cam holding screw (Fig. 41).
- Press the key on the electronic switchboard (Fig. 37) to close the
up-and-over door movement. Release the button once the closing
operation has been completed. Slacken the holding screw for the red
cam and turn until the microswitch is activated (Fig. 43).
- Tighten the red cam holding screw (Fig. 44).
- Carry out a complete opening and closing cycle to check that the cams
are positioned perfectly. Correct positions if required.
- Turn DIP8 to OFF.
Refer to the section ELECTRICAL CONNECTIONS for connection to
auxiliary units and switchboard functions.
Close the electrical box with the appropriate cover using the 6 screws
provided.
ELECTRICAL CABLE FIXING
The electrical cable that powers the
operator should be fixed to the telescopic
lever using the plastic bands shown in
Fig. 36.
The cable should be curved in order
that it is not subject to twist, tension or
tearing while the door is in movement.
Cables exiting the door plate hole should
be protected with some form of sheath to
avoid their being cut during movement.
36
33
34
35
37
DIP 8
1
EN
Bekijk gratis de handleiding van Vimar RS13, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vimar |
| Model | RS13 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6937 MB |
