Vimar RS05 handleiding
Handleiding
Je bekijkt pagina 22 van 32
20
RX
+-CNCNA
+-
+
COM
STPA
-
-
TX
RX1
+-CNCN
A+
-
RX2
+-CNCNA
+-
+
COM
FOTO
-
-
TX1 TX2
4.5.3 Connecting photocells with photo-test function active
If the photo-test function is activated (the control unit checks the operation of the photocells, see dip switch 5 ON), respect the following connection
(each time the motor starts the control unit cuts off power to the transmitter of the photocell to check their operation):
Stop button connection, normally closed contact, opening the contact causes the gate to stop and suspends the automatic closing time (when the
button is not engaged, the STOP LED should be lit), if not used then jumper between COM and STOP.
4.6 Stop button connection
N.B. If the system has no photocells, sensitive edges or stop buttons (the FOTO, STPA and STOP inputs must be jumpered with the common,
terminal 13), do not activate the photo-test function.
STPA as internal
photocell
Normally closed button
Fig. 10
Fig. 11
ON
1 2
ON
1 2
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1
2 3 4 5 6 7 8
1
2
3
4
5
ON
1 2 3 4 5 6 7 8
6
EN
Bekijk gratis de handleiding van Vimar RS05, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vimar |
| Model | RS05 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2892 MB |
