Vimar 02974.N handleiding
Handleiding
Je bekijkt pagina 3 van 7
Viale Vicenza 14
36063 Marostica VI - Italy
www.vimar.com
30811.x-02974 02 2507
WEEE - User information
The crossed bin symbol on the appliance or on its packaging indicates that the product at the end of its life must be collected separately
from other waste. The user must therefore hand the equipment at the end of its life cycle over to the appropriate municipal centres for the
differentiated collection of electrical and electronic waste. As an alternative to independent management, you can deliver the equipment you
want to dispose of free of charge to the distributor when purchasing a new appliance of an equivalent type. You can also deliver electronic
products to be disposed of that are smaller than 25 cm for free, with no obligation to purchase, to electronics distributors with a sales area
of at least 400 m
2
. Proper sorted waste collection for subsequent recycling, processing and environmentally conscious disposal of the old
equipment helps to prevent any possible negative impact on the environment and human health while promoting the practice of reusing
and/or recycling materials used in manufacture.
The Apple, iPhone and iPad logos are trademarks of Apple Inc., registered in the United States and in other Countries
and Regions. App Store is a service trademark of Apple Inc.
Google is a trademark of Google LLC.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
CONNECTION WITH CIRCULATION PUMPS, BURNERS, FAN COILS, SOLENOID VALVES AND TEMPERATURE PROBE
Menu Parameters
Function
Fan coil speed band
From 1 °C to +3 °C, in 0.1°C steps
(both for 3-speed and proportional fan
coils)
Function
Fan coil actuation delay time
From 0 a 240 s in 1 s steps
(both for 3-speed and proportional fan
coils)
Climate control
Type of algorithm
OnOff/PID
Climate control
Hysteresis
From 0.1 °C to 1.0 °C, in 0.1°C steps
(only if Type of algorithm is OnOff)
Climate control
Proportional band
From 0.5 °C to 5.0 °C, in 0.1°C steps
(only if Type of algorithm is PID)
Climate control
Integrative time
From 5 to 120 min, in 1-min steps
(only if Type of algorithm is PID)
Climate control
Derivative time
From 0 a 255 s in 0.1s steps
(only if Type of algorithm is PID)
Climate control
Cycle time
From 10 to 30 min, in 1-min steps
(only if Type of algorithm is PID)
The View Wireless App can be used to associate a magnetic or wired contact of art. 03980 or
an input of the 3in 1out module 03983 to turn off the temperature control system in the event
of an open window; in this case, the time for reaction and reactivation of contact opening and
closing (Window reaction time and Window reactivation time) can be set:
The View or View Wireless App can be used to set:
• Time schedules (times and temperature levels T1, T2 and T3)
• Setpoint for all operating modes (Manual, Reduction, Economy, Protection)
• Manual operation time: between 1 min and 23 hours (with 1-min steps); default = 60 min
• Screed, exclusive Text, average functions.
OPERATION IN Zigbee technology MODE.
If Zigbee technology is being used, associate the device directly with a ZigBee Gateway (for
instance Amazon Echo Plus, SmartThings Hub). The following parameters can be configured:
• Lighting in standby: high, medium, low, off; default setting = medium
• Ring indication selection: automatic or monochrome; default setting = automatic
• RGB colour selection: you can choose the colour for the monochrome setting
• Temperature calibration for heating: from -5°C to +5°C; default setting = 0°C
• Temperature calibration for cooling: from -5 °C to +5 °C; default setting = 0 °C
USE.
The front buttons, the display, the dial and the lighting of the ring around the display can be used
to set and display all the operating modes of the thermostat.
Use the dial to set a new setpoint. In particular, for operation in Bluetooth technology:
- in automatic operating mode, turn the dial for the thermostat to switch to manual operation
for a period of time which can be set on the View App;
- with automatic operating mode, when the early switch-on function is enabled, the timed
manual mode is available with a fixed time which is defined by the advance algorithm.
- in manual operation or reduction mode, the thermostat remains in this mode and the setpoint
is that set on the dial.
- The thermostat can manage one or more thermostatic heads 03989 or the fans of a fan coil
via actuators art. 03985 or art.03986.
REGULATORY COMPLIANCE.
RED Directive. RoHS directive. ErP directive.
EN 60730-2-7, EN 60730-2-9, EN 301 489-17, EN 300 328, EN 62479, EN 63000 standards.
Vimar SpA declares that the radio equipment complies with Directive 2014/53/EU. The full text
of the EU declaration of conformity is on the product sheet available on the following website:
www.vimar.com
Temperature control device regulation (EU) no. 811/2013.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
CNO
6 mm
100-240V~
50/60Hz
5(2)A
–T40
1.B.U
NL
CNO
6 mm
1
50/6
–T40
NL
Bekijk gratis de handleiding van Vimar 02974.N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vimar |
| Model | 02974.N |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 1445 MB |
