Vimar 01532 handleiding

Niet gecategoriseerd

Vimar

74 pagina's

PDF beschikbaar

Handleiding

BUILDING AUTOMATION

Parameter “Auto. Operation on object value”

This parameter sets the value of the message used to activate the automatic operation. Options:

0=Auto/1=Cancel

1=Auto/0=Cancel

0=Auto/1=Cancel: When the object “Automatic function” receives the telegram value “0”, it activates the automatic operation. When it receives “1”, it

exits the automatic operation;

1=Auto/0=Cancel: When the object “Automatic function” receives the telegram value “1”, it activates the automatic operation. When it receives “0”, it

exits the automatic operation.

Parameter “State of Auto. operation after startup”

This parameter sets whether automatic operation is enabled when the device starts up. Options:

Disable

Enable

Disable: After the device is started, the automatic operation is disabled by default.

Enable: After the device is started, the automatic operation is enabled by default.

Parameter “Automatically enable auto. operation”

This parameter sets whether the auto-enable feature of automatic operation is enabled. Options:

Yes

Yes: When enabled, the next parameter is visible.

• Parameter “Enable auto. Operation after in[10..6000]min”

This parameter sets the time from automatic return to automatic operation from normal

operation. Options:

10..6000

Parameter “Threshold value OFF<->ON [1…100]%”

This parameter defines the threshold. The fan can automatically change its operating state according to the threshold range in which the control value is

located. The control value is determined by the object “Control value”. Options:

1...100

If the control value is greater than or equal to the threshold set by the parameter, the fan is turned on;

If the control value is less than this threshold, the fan is turned off.

Parameter setting description in the ETS

Bekijk gratis de handleiding van Vimar 01532, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.