Vimar 01532 handleiding

Niet gecategoriseerd

Vimar

74 pagina's

PDF beschikbaar

Handleiding

BUILDING AUTOMATION

4.3.6 Parameter window “Ox: Operation hours counter”

The parameter window “Ox: Operation hours counter” setting interface in Fig. 4.11 will be visible with “enable” in the parameter “Function of “Operation hours

counter”” in Fig. 4.4. The function is use for counting the time of relay on.

Fig. 4.11 Parameter window “Ox: Operation hours counter”

Parameter “Object datatype of “ Operation hours counter”

This parameter is used to select data type of the operation hours counter. Options:

2 byte Value in h (DPT 7.007)

4 byte Value in s (DPT 13.100)

The “2 byte Value in h (DPT 7.007)” option indicates that the count value is 2 bytes; the “4 byte

Value in s (DPT 13.100)” option indicates that the count value is 4 bytes.

Parameter “Cyclically send counter value in h[0..100] (0=not send, only for reading)”

The parameter determines the time interval to send the telegram which is used for counting the time of relay on. Available options:

0-100

“0” means do not send. “1-100”means 1 hours to 100 hours cyclically send the value. When the parameter “Object of switch and operation hours counter” is set

to 2 bytes, the operation time is in hours; when it is 4 bytes, the operation time is in s.

The priority for various operations of switch actuator control:

Initialization(After the parameter download is completed) Manual operation (Long press the manual button to switch to manual operation, and the

button of the channel has operation) force operation general operation

Apply to the following points:

1. Manually operating the switch actuator has the highest priority, hi gher than force operation, if the force is activated, the status will back to force

operation when you exit the manual operation.

2. Suppose running the time function currently, if the channel has manual operation, it will be interrupted and ignored if time counter don’t complete.

3. Under the manual operation, any message received is invalid and will not be recorded.

Parameter setting description in the ETS

Bekijk gratis de handleiding van Vimar 01532, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.