Vimar 01532 handleiding

Niet gecategoriseerd

Vimar

74 pagina's

PDF beschikbaar

Handleiding

BUILDING AUTOMATION

4.3.4 Parameter window “Ox: Scene”

The parameter window “Ox: Scene” setting interface shown in Fig. 4.9 will be visible when selecting “enable” in “Function of ‘Scene’” in Fig. 4.4. Here can set 8

scenes

Fig. 4.9 Parameter window “Ox: Scene”

Parameter “Overwrite scene stored values during download”

This parameter sets whether to override the scene save value during application download. Options:

Disable

Enable

Disable: If selecting “Disable”, the stored values before the download can be not overwritten by the parameterized scene value. When the scene is called, the

scene saved before the download is still enabled until it is replaced by the new storage scene.

Enable: If selecting “Enable’, the stored values will be overwritten by the parameterized scene value during the download. When the scene is called, the scene will

be set according to the parameters until it is replaced by the new storage scene.

Parameter “channel is assigned to (1...64 , 0= no assignment)”

It is able to allocate 64 different scene numbers to every output. There are 8 various scenes can be set per output. Options

Scene 1... Scene 64

0=no assignment

Note: 1-64 in the parameter setup corresponds to the scene number 0-63 received by the communication object “Scene”. If a scene is stored via a

learning telegram, the new scene will be active immediately and still be valid even if power failure.

Parameter “Standard output value is”

This parameter defines the switch output status when recall the scene. Options:

Open

Parameter setting description in the ETS

Bekijk gratis de handleiding van Vimar 01532, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.