VigilLink VLKV-H2041M handleiding
Handleiding
Je bekijkt pagina 8 van 31
5/28
6 AUTO button
Automatic switching button, only available in single screen
display mode.
7 INPUT button
▪
In single screen display mode, short press this button to
switch the input source.
▪
In multiview mode, short press this button to display the
yellow border, or when there is already a yellow border,
press this button to switch it to the next window with the
sequence as following:
PIP: WIN1->WIN2->WIN1 PBP: WIN1->WIN2->WIN1
Triple: WIN1->WIN2->WIN3->WIN1
Quad: WIN1->WIN2->WIN3->WIN4->WIN1
Note: The yellow border indicates the position of
keyboard,
mouse or USB 3.0. And it is displayed on WIN1 by default.
▪
Long press this button, then the OSD on the window will
display the corresponding input source.
8
Multiview
button
Multiview display mode switching button.
▪
Short press this button to circularly select: Single - PIP -
PBP (1) - PBP (2) - Triple (1) - Triple (2) - Quad (1) - Quad
(2) - Single.
▪
Long press this button for 3 seconds to select the aspect
ratio (16:9/Full) for PBP (1) / PBP (2) / Triple (1) / Triple (2)
/Quad (1) / Quad (2).
9
RES button
Output resolution switching button.
▪
Short press the RES button, the OSD will display the
current output resolution of the HDMI OUTPUT port.
Short
press the RES button again before the OSD disappears
to circularly switch the output resolution (Please refer to
the output resolution list of “8. Video & Audio”).
▪
Long press the RES button for 3 seconds to switch the
output resolution to 1280x720p 60Hz.
10
USB 3.0 port USB 3.0 Device input port.
Bekijk gratis de handleiding van VigilLink VLKV-H2041M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLKV-H2041M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3538 MB |
