VigilLink VLIP-JP1G-CTRL handleiding
Handleiding
Je bekijkt pagina 26 van 55
26
audio source for Encoder HDMI output and Decoder audio
output.
Network Settings
1. IP Mode: Click the drop-down menu to set the IP mode
(Static/DHCP).
2. IP Address: The IP address of the Encoder.
3. Subnet Mask: The Subnet Mask of the Encoder.
4. Gateway: The Gateway of the Encoder
Note:
(1) If the IP mode is set to “Static”, you can manually set the IP Address, Subnet
Mask and Gateway as required. Then click “Apply”, the Encoder will immediately
reboot to take eect.
(2) If the IP mode is set to “DHCP”, it will search and be lled with the IP Address
assigned by the router automatically.
(3) If the Encoder is actually alive in the system but with incorrect network segment
settings, even though the Encoder is oine, its network settings including IP address
can be changed and set.
Connecting for a Smarter Future
26
Bekijk gratis de handleiding van VigilLink VLIP-JP1G-CTRL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLIP-JP1G-CTRL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4882 MB |
